User manual DELONGHI PRO 1100

[. . . ] GB IMPORTANT Read this manual thoroughly before using the appliance. This will ensure optimum results and maximum safety. Save these instructions for future reference. WARNINGS Carefully read the following instructions. · The use of all electrical appliances implies the observance of some fundamental rules. [. . . ] · Do not rest or use the iron on zips, hooks, rings etc to avoid scratching the plate. · Keep the surface of the plate clean. To clean, when cold, wipe the surface with a damp cloth. The iron must never be treated with descaling products. · After use, always wait for the iron to cool down before putting away. Avoid touching the water tank while the iron is hot. · It is not necessary to empty the tank after ironing. However, the appliance should be drained of water if left unused for long periods. · Separate clothes according to the recommended ironing temperature and begin ironing with items requiring the lowest temperatures. · Silk may be dry-pressed on the reverse. · Wool, cotton and fine linen can either be steam-ironed on the reverse or on the right side, interposing a thin cloth between the iron and the fabric to avoid "shine". · · · · · Starched fabrics require greater moisture. Iron whites and light colours on the right side and dark colours on the reverse. Embroidery should also be ironed on the reverse to make it stand out. Linen can be steam-ironed with abundant steam. Iron dark colours on the reverse to avoid "shine". Iron lapels on the right side to make them stand out. Each time the iron is used (including for the first time) or if you have not used the steam for several minutes, press the steam discharge button several times away from the ironing board. This will eliminate cold water from the steam circuit. This iron for domestic use is fitted with a special device to obtain either steam discharge over the whole plate or concentrated in one point. If you require steam discharge over the whole plate, press the steam discharge button (2) with the iron in a horizontal position. Hold the button (2) down and move the iron into a vertical position to obtain continuous steam discharge over the whole plate. If, on the other hand, you require steam discharge concentrated in one point, push the steam discharge button (2) with the iron in a vertical position. [. . . ] To discharge steam, press the steam button (2) on the iron. NB: If your iron has both buttons (2) and (2A), you can choose to use either the top or the bottom button as you prefer. Steam button lock (1) This device allows a continuous output of steam to be obtained by keeping the steam button pressed down mechanically, avoiding the need to do so manually. To use, simply press the button (2) and slide the lock backwards. [. . . ]