User manual DELONGHI PRO 380

[. . . ] IRONING SYSTEM WITH PRESSURIZED BOILER BÜGELSTATION MIT DRUCK-DAMPFKAMMER SISTEMA STIRANTE CON CALDAIA IN PRESSIONE STRIJKSYSTEEM MET VERWARMINGSELEMENT ONDER DRUK SISTEMA PARA PLANCHAR CON CALDERA BAJO PRESION SISTEMA PARA PASSAR ROUPAS COM CALDEIRA PRESSURIZADA ªTMÀTMª ª §µ À¶ ¶TM CENTRALE DE REPASSAGE AVEC CHAUDIÈRE SOUS PRESSION Instructions for use Gebrauchsanleitung Istruzioni per l'uso Gebruiksaanwijzingen Instrucciones para el uso Instruções para a utilização ËÁ>Â~ ¯Ú<ÛË~ Mode d'emploi FIG. [. . . ] WARNING: Very carefully dispose of the cut off plug after removing the fuse: do not insert in a 13 Amp socket elsewhere in the house as this could cause a shock hazard. With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the plug is a moulded-on type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362. In the event of losing the fuse cover, the plug must NOT be used until a replacement fuse cover can be obtained from your nearest electrical dealer. The colour of the correct replacement fuse cover is that as marked on the base of the plug. If your appliance is not fitted with a plug, please follow the instructions provided below: B) WARNING - THIS APPLIANCE MUST BE EARTHED IMPORTANT The wires in the mains lead are coloured in accordance with the following code: E Green and yellow: Earth Blue: Neutral L N Brown: Live As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The green and yellow wire must be connected to the terminal in the plug marked with the letter E or the earth symbol or coloured green or green and yellow. [. . . ] The brown wire must be connected to the terminal marked with the letter L or coloured red. [. . . ]