User manual DELONGHI R 030915VTW

[. . . ] Do not operate the appliance if damaged 2. FITTING THE FEET Remove the feet and the castors from the polystyrene packing. Fit the castors to the spindles on the feet and push firmly until they click into position (fig. Pull each castor to check that it is fitted correctly. [. . . ] Adjusting the thermostat When the room has reached the required temperature, slowly turn the thermostat until the indicator light goes off (or to the position marked by a click) and no further. The set temperature will then be regulated automatically and kept constant by the thermostat. Frost protection function With the thermostat in position and the switches pressed, the appliance maintains the room at a temperature of about 5°C, preventing freezing with minimum energy consumption. c) Models with a 24 hour time-clock (fig. 7) To programme heating, proceed as follows: - Look at the time on your clock or watch. If it is 10. 00, turn the numbered timer disk clockwise until the number 10 on the disk coincides with the pointer on the timer. Set the periods of time when you want the appliance to work by pushing the teeth inwards. Each tooth corresponds to a period of 15 minutes. This will leave visible sectors which correspond to the periods of operation. When set, the radiator will operate automatically each day during the times programmed (important: the radiator must always be plugged into the socket). - To change the programming, move the teeth back into the initial position and set the new periods of functioning. - If you want to make the appliance operate without programming, push all the teeth into the centre. In this case, to turn the appliance off completely, as well as turning the switches off, you must also unplug it from the mains to avoid continued operation of the timer. * 3 5785002300 14-02-2002 10:52 Pagina 4 d) Models with mechanical 12 hour timer (programming of delayed start). With this timer, you can set the hour you want the radiator to start operating automatically. - Turn the appliance on and select the required power and temperature by proceeding as follows. - Rotate the timer knob clockwise until the pointer coincides with the number corresponding to the required hours. The appliance will begin to warm up after the set time has expired. TURBO HEATING Some models are fitted with a heating fan which heats the room more quickly. To turn this function on, push the button into the position Important: a safety device cuts in and switches off the appliance if it overheats due to an accumulation of dust on the air intake and output grills. To restart it, unplug from the mains and leave the appliance to cool down. [. . . ] - The appliance must never be placed immediately under a fixed mains socket. - This radiator is filled with a precise quantity of oil and repairs which require it to be opened must be carried out exclusively by the manufacturer or an authorised service centre. In the case of oil leaks, contact the manufacturer or the authorised service centre. - When scrapping the appliance, respect legislation on the disposal of oil. [. . . ]