User manual DELONGHI SFA 2042

[. . . ] General instructions Your stove is designed for use throughout your living area, such as against a wall or in a corner, to add instant warmth and ambiance. Position the fire so that the plug socket is accessible. Always ensure there is sufficient airflow, otherwise the operation of the stove will be compromised. [. . . ] 2 Noise As with all fan driven appliances the stove will make some noise due to the movements of air occurring, this is perfectly normal. Installing the flue If you want to install the flue, proceed as follows: remove the hole cover by pressing on one side only (fig. fit the stove flange (L) in the hole and screw on with the stove screw supplied (fig. decide where you want to install the appliance. fit the longest part of the pipe on the flange stove (fig. move the stove near the wall and place the drilling templa te between the pipe and the wall to establish the correct position for the hole in the wall. fix the drilling template with adhesive tape or a suitable alternative (fig. Move the stove out of the way and drill the wall with a 6mm dia. masonry drill bit to the depth required. fix the wall flange (I) to the wall with the wall screw and fixing plug supplied. Put the stove back in position and fit the flue onto the flange. Maintenance Before any maintenance/cleaning is undertaken always disconnect the stove from the power supply and allow to cool down. Replacing light bulbs Tools required: correct screwdriver (not included in the box). Remove the coal, pebbles, or logs from the internal support shelf, then remove the support by removing the screw provided as shown in fig. The light bulbs must be replaced only with 40W 220-240V screw type E27. Please note that replacement bulbs are not covered by the guarantee of the product. 4 Fig. 5 Cleaning The stove can be cleaned with a soft damp cloth. Do not use metal polish or harsh scouring agents. [. . . ] · Should you wish to connect the fire to a fused spur, this must be carried out by a competent electrician in accordance with the IEE wiring regulations. · This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance · The front face of the heater must be positioned at least 50 cm from furniture, walls, curtains, or other objects. [. . . ]