User manual DELONGHI XL 3010PE

[. . . ] 9) Never unplug the appliance by pulling the power cable or the appliance itself. 10) Do not use the dust bag handle to move the appliance. 11) Keep out of reach of children and unfit persons. 12) Use the appliance for domestic use only as described in the instructions. [. . . ] 3) is pushed, the bristles protrude to clean hard floors more efficiently. This position is recommended for in-depth cleaning of floors and for floors with profig. When the "carpets" pedal ( ) is pushed, the bristles retract and the brush is ready to clean fabric surfaces or vacuum up coarse dirt (eg. large breadcrumbs) which would otherwise be trapped in the bristles. To reach under radiators or shallow furniture, lower the brush by rotating it clockwise or anticlockwise. Brush for cleaning delicate floors (fig. 4) This special brush has soft natural horsehair bristles and felt wheels which run over even the most delicate floor without damaging it, leaving it perfectly clean fig. 4 10 TURNING THE APPLIANCE ON Set the appliance up according to your cleaning requirements, then plug into a suitable mains socket. Press the ON/OFF button B. REGULATING SUCTION POWER Before turning the appliance on, you are recommended to turn the regulator to minimum. · MAX power: efficiently vacuums all types of dirt by exploiting the power of the cleaner to the full. · MED power: saves electricity and is ideal for removing dust from hard floors and upholstery. · MIN power: essential when vacuuming delicate and light objects such as lightweight upholstery to avoid the fabric being sucked up and hampering efficient cleaning. To change power, press the button until the LEDs corresponding to the required power light up: LED 1 on = MIN power; LED 2 on = MED power; LED 3 on = MAX power. The appliance has a super power function recommended for carpets, but also to facilitate cleaning in particularly inaccessible points (eg. corners, edges) or in the presence of heavy dirt (eg. To select, press the "Super Power" button. The LED on the button itself lights up). PARKING" POSITION While cleaning, the appliance can be left briefly in the vertical. Simply extract the bristles (by pressing the pedal ), place the brush in an upright position and push the cleaner forwards until the guide X fits into the slot Y (see figure 5). [. . . ] 9) so that the corners of the bag do not protrude from the bag holder (fig. Replace the bag holder on the appliance, making sure it is posi- fig. To guarantee vacuuming efficiency and exploit the full capacity of the bags, use bags authorised by the manufacturer only. fig. 11) To keep suction power at maximum efficiency, the motor cool and the air given out completely clean and dust free, always keep the HEPA* filter clean. [. . . ]