User manual DELPHI MYFI SA10113

[. . . ] Satellite Radio Receiver · User Guide Model SA10113 Warning: This manual contains important safety and operating information. Please read, understand, and follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or damage to your MyFi receiver, accessories, and/or to your vehicle or other property. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. [. . . ] You can adjust the hours by time zone, choose 12- or 24-hour formats, and choose whether Daylight Savings Time is used in your area. Your MyFi also has a sleep timer and an alarm. You can set the sleep timer to shut off your MyFi automatically after 15 minutes or up to an hour. The alarm turns on your MyFi at a certain time; you can choose to be alerted by a beep or by XM programming. Important!: If you use your MyFi in your vehicle, you can choose whether your ignition key automatically powers on your MyFi. Choose the "Vehicle Mode" menu, and then the "Auto On/Off". Set to "On" to turn MyFi on or off with the ignition key. Set this option to "Off" if your MyFi is connected to power that is always live; you must then use MyFi's power button to turn it on or off. For vehicles with power outlets that are always powered, we recommend that you use the "Delayed Power OFF" feature. This avoids draining your vehicle battery if your MyFi is left on. 25 Skipping channels You can simplify the list of channels that you see when you rotate the dial. Use the "menu" button and dial to select "Channel Access. " 2. Choose the "Channel Skip/Add" option. There is a "+" or a "-" in front of each channel. To skip a channel, highlight that channel and press the dial in to change the "+" to "-. " To add a channel, change the "-" to a "+. " 4. When you're done, press the "menu" button twice (or do nothing for 15 seconds) until your MyFi returns to normal operation. TIP: You can still tune to any channel by entering the channel number or by pressing a preset. Skipping a channel does not remove it from use. TIP: This should not be used for "parental control. " To completely block access to any XM channel, contact XM Listener Care at 1. 800. XM. RADIO (1. 800. 967. 2346). Returning to factory defaults You can return your MyFi to its factory-installed format. Be careful: This feature erases all settings, including Stock Ticker, display options, audio options, channel skip/add, Info Extras, and anything stored in "MY XM. " 1. Use the "menu" button and dial to select "Set Factory Defaults. " 2. Select "Yes" to restore your MyFi to the factory settings. 26 Using MyFi At Home Turn off your MyFi and your audio system. Connect your MyFi to your audio system in either way illustrated below. If you use the home stand and connect it to a stereo, you must plug in the AC adaptor and home antenna. [. . . ] The duration of Delphi's warranty with respect to the battery and ear bud components of any Product is limited to thirty (30) days from the date of sale to the original consumer purchaser. No other express warranties are made with respect to any Product. All implied warranties, including warranties of merchantability and fitness for a particular product are limited to the warranty period set forth above. This warranty is not transferable and applies only to the original consumer purchaser of the Product. [. . . ]