User manual DENON AVR-1708

[. . . ] AV SURROUND RECEIVER AVR-1708 Owner's Manual Manuel de l'Utilisateur ENGLISH FRANCAIS n SAFETY PRECAUTIONS 1. SAFETY INSTRUCTIONS Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. Follow Instructions ­ All operating and use instructions should be followed. [. . . ] Surround mode does not change according to input signal. ON OFF : Use room EQ. : Do not use room EQ. Surround Playback of 2-channel Sources To select these surround modes using the SELECT/ENTER knob on the main unit or press the STD button on the main remote control unit. The mode switches each time the button is pressed. n When using a surround back speaker A5 Remote ID Setup Set remote control ID. [Selectable items] DOLBY PLgx DTS NEO:6 n When not using a surround back speaker neural The auto surround mode function lets you store in the memory the surround mode last used for playing the three types of input signals listed below. qAnalog and PCM 2-channel signals (STEREO) w2-channel signals of Dolby Digital, DTS or other multi-channel format (DOLBY PLgx Cinema) eMulti-channel signals of Dolby Digital, DTS or other multichannel format (DOLBY/DTS SURROUND) b Default settings are indicated in ( ). [Display] 1. Sp 2. In 3. Op E [Selectable items] DOLBY PLgx or DOLBY PLg E DOLBY PLg DTS NEO:6 neural Option Setup 15 Remote ID 1 : The signals are decoded in DOLBY PLgx or DOLBY PLg for playback. : This mode is suited for movie sources. : This mode is suited for music sources. be selected when playing with a DOLBY PLg decoder. When this mode is selected, "DOLBY PL is displayed. " Cinema Music [Selectable items] 1 2 3 4 Game A3 Room EQ Setup Select room EQ setting method. NOTE When using the AVR-1708 with only the included remote control unit (RC-1075), there is no need to make settings. When using a separately sold remote control unit (RC-7000CI, etc. ), this function can be used. Match the ID setting of the remote control unit and the receiver. E Pro Logic : This is the Pro Logic playback mode. This can [Display] 1. Sp 2. In 3. Op Option Setup E DTS NEO:6 Cinema Music neural : The signals are decoded in DTS NEO:6 for playback. : This mode is suited for movie sources. : This mode is suited for music sources. : It is possible to play analog input signals and PCM (2-channel, 48 kHz or less) in the surround mode. This is the optimum mode for playing sources recorded in XM HD Surround (vpage 38). 13 EQ All [Selectable items] All : Apply settings to all surround modes. Assign : Make settings for each surround mode separately. Operations (vpage 22) ENGLISH Select the "Cinema" "Music" "Game" and "Pro Logic" modes at , , "Surround Parameter" ­ "MODE" (vpage 31). DSP Simulation Playback The desired mode according to the program source and viewing situation can be selected from among 7 DENON original surround modes. The surround parameters can be adjusted (vpage 53, 54) to achieve an even more realistic, powerful sound field. Stereo Playback [Selectable items] STEREO : This is the mode for playing in stereo. Sound is output from the front left and right speakers and subwoofer. Getting Started Connections Playing Multi-channel Sources (Dolby Digital, DTS, etc. ) [Selectable items] STANDARD : This mode is for decoding the input signals according to their format and playing surround sound. The display when the STANDARD mode is selected depends on the input signal and surround back output playback mode. [Selectable items] 5CH / 7CH STEREO z1 :This mode is for enjoying stereo sound from all speakers. Direct Playback [Selectable items] DIRECT : In this mode the signals bypass the tone adjustment circuitry for high quality sound. The sound is output to the same channels as the input signal. [. . . ] DTS sound is not · DVD player's audio output setting · Set the DVD player. refer to the DVD player's operating instructions. · DVD player is not compatible · Use a DTS-compatible player. · The AVR-1708's "Input Mode" · Set to the "Auto" or "DTS" setting is set to other than mode. [. . . ]