User manual DENON AVR-2308

[. . . ] AV SURROUND RECEIVER AVR-2308 Owner's Manual Bedienungsanleitung Manuel de l'Utilisateur v Book 1 Book 2 English Italiano Deutsch Français PRESET CODE Español Nederlands Svenska ENGLISH DEUTSCH FRANCAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA · DECLARATION OF CONFORMITY We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3. Following the provisions of 2006/95/EC, 89/336/EEC and 93/68/EEC Directive. n SAFETY PRECAUTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: CAUTION To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user. CAUTION: · ÜBEREINSTIMMUNGSERKLÄRUNG Wir erklären unter unserer Verantwortung, daß dieses Produkt, auf das sich diese Erklärung bezieht, den folgenden Standards entspricht: EN60065, EN55013, EN55020, EN61000-3-2 und EN61000-3-3. Entspricht den Verordnungen der Direktive 2006/95/EC, 89/336/EEC und 93/68/EEC. VORSICHT: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] : Show display for 10 seconds after operation. : Turn display off. [Input characters] A ~ Z a ~ z 0 ~ 9 !@ [ \ ] (space) Connections [Selectable items] ON OFF : Activate the screensaver if there is no activity for about 3 minutes. : Turn the screensaver function off. h Trigger Out Select the conditions to turn on the trigger out with respect to the zone, input source, surround mode, etc. For details about the trigger out function, see page 18. Setup iPod Information This sets the time the on-screen display is displayed when an operation is performed. Playback Selecting the Zone Select the zone for which the trigger out is set. Text Input source and mode display. [Selectable items] Always : Show display continuously. 30sec 10sec OFF : Show display for 30 seconds after operation. : Show display for 10 seconds after operation. : Turn display off. Remote Control [Selectable items] ON OFF : Turn display on. : Turn display off. Setting with Respect to the Input Source When the input source set to on is selected, the trigger out turns on. Multi-Zone Master Volume Master volume display during adjustment. Display Mode Select the on-screen display's display mode. Setting with Respect to the Surround Mode · When the surround mode set to on is selected, the trigger out turns on. · Associated with respect to surround modes that are set to "ON" . · This can be set if the "MAIN ZONE" is selected at "Selecting the Zone" . · Associated when an input source for which "Setting with Respect to the Input Source" is set to "ON" is selected. Information [Selectable items] ON OFF : Turn display on. : Turn display off. [Selectable items] Mode1 : If there is no video signal, flickering of the on-screen display is not prevented. Troubleshooting Mode2 : Prevents flickering of the on-screen display when there is no video signal. Use this mode if the on-screen display does not appear in the Mode 1, as may happen according to the TV being used. [Selectable items] ON ­­­ : Activate trigger on this mode. : Do not activate trigger on this mode. ENGLISH j Remote ID Setup Set remote control ID. l Display Adjust display brightness of the receiver. Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting [Selectable items] NOTE 1 2 3 4 [Selectable items] Bright : Normal display brightness. Dim Dark OFF : Reduced display brightness. : Display is off unless controls are operated. When using the AVR-2308 with only the included remote control unit (RC-1081), there is no need to make settings. When using a separately sold remote control unit (RC-7000CI, etc. ), this function can be used. Match the ID setting of the remote control unit and the receiver. Operating from the remote control unit Press the DIMMER button. Bright OFF Dim Dark k 2Way Remote Make setting for 2-way remote control unit. [Selectable items] Used : Use 2-way remote control. A0 Setup Lock Protect settings from inadvertent change. Not Used : Do not use 2-way remote control. [Selectable items] When using a 2-way remote control unit (RC-7000CI and RC-7001RCI, sold separately), set this to "Used" . ON OFF : Turn protection on. : Turn protection off. · When "Setup Lock" is set to "ON" the settings listed below can , no longer be changed. Also, "SETUP LOCKED!" is displayed if you attempt to operate related buttons. [. . . ] · Connect a monitor that is compatible with copyright protection (HDCP). · Match the HDMI format of the player and monitor. · The video conversion function does not work for the REC OUT connectors. Match the input source and recorder connections. [. . . ]