User manual DENON AVR-2700

[. . . ] <Primary DNS> Do not set this parameter. <Second DNS> Do not set this parameter. <Proxy> Set this parameter "OFF". <Network Option:Standby Mode Power Saving> "OFF"---Use this setting when using the AVR-2700/AVC-A1XV connected in a network. [. . . ] COMMAND : The message sent to a system(AVR/AVC) from a controller(Touch Panel etc. ) A command to a system is given from a controller. EVENT : The message sent to a controller(Touch Panel etc. ) from a system(AVR/AVC) The result is sent, when a system is operated directly and a state changes. *The form of EVENT presupposes that it is the same as that of COMMAND. **Refer to the following table for the contents of COMMAND and EVENT. RESPONSE : The message sent to a controller(Touch Panel etc. ) from a system(AVR/AVC) if the `request command' (COMMAND+?+CR(0x0D)) has came from a controller. The RESPONSE should be sent within 200ms of receiving the COMMAND. *The form of RESPONSE presupposes that it is the same as that of EVENT. Basic specification : The command by ASCII CODE, parameter expression *ASCII CODE which can be used is from 0x20 to 0x7F : the alphabet and the number of 0-9 , and space (0x20) , Some signs , AND carriage return(0x0D)--- It is used only as a pause sign. Command structure : COMMAND + PARAMETER + CR(0x0D) COMMAND : ASCII CODE of 2 characters ex. SI : Select Input source MS : surround Mode Setting MV : Master Volume setting PW : system PoWer setting PARAMETER : ASCII CODE ( up to 25 characters) ex. DVD : function name CDR/TAPE : function name THX SURROUND EX : surround mode name SUPER STADIUM : surround mode name *Special Parameter--- ?: for request command 4/25 29. Mar. 06 The example of a command * <CR> is the meaning of 0x0D. SIDVD<CR> : Select Input source DVD MSTHX SURROUND EX<CR> : surround Mode Set to THX SURROUND EX MVUP<CR> : Master Volume UP PWON<CR> : system PoWer ON PWSTANDBY<CR> : system PoWer STANDBY SI?<CR> : Request command for now playing input source >> Return RESPONSE `SI***<CR>' 5/25 29. Mar. 06 Others A) COMMAND is receivable also during transmission of EVENT. The BOLD COMMANDS are new. TM * * 12/25 29. Mar. 06 COMMAND Z2CV PARAMETER Z2FL UP FL DOWN FL ** FR UP FR DOWN FR ** C UP C DOWN C ** SW UP SW DOWN SW ** SL UP SL DOWN SL ** SR UP SR DOWN SR ** SBL UP SBL DOWN SBL ** SBR UP SBR DOWN SBR ** SB UP SB DOWN SB ** Z2CV COMMAND : "*" parameter uses The BOLD COMMANDS are new. function MULTI ZONE-2 CHANNEL VOLUME UP/DOWN , direct change to **dB ---FRONT Lch **:38 to 62 by ASCII , 50=0dB ---FRONT Rch **:38 to 62 by ASCII , 50=0dB ---CENTERch **:38 to 62 by ASCII , 50=0dB ---SUBWOOFERch **:00, 38 to 62 by ASCII , 50=0dB 00=OFF ---SURROUND Lch **:38 to 62 by ASCII , 50=0dB ---SURROUND Rch **:38 to 62 by ASCII , 50=0dB ---SURROUND BACK Lch (SBch 2SP) **:38 to 62 by ASCII , 50=0dB ---SURROUND BACK Rch (SBch 2SP) **:38 to 62 by ASCII , 50=0dB ---SURROUND BACKch (SBch 1SP) **:38 to 62 by ASCII , 50=0dB two or three ASCII characters. ON/OFF Z2PSCINEMA EQ. OFF<CR> Z2PSMODE:MUSIC<CR> CINEMA / MUSIC / GAME / PL mode change (This parameter can change DOLBY PL2, PL2x, NEO:6 mode. ) Z2PSMODE:CINEMA<CR> Z2PSMODE:GAME<CR> ---SB=ON PL2x mode / SB=OFF PL2 mode Z2PSMODE:PRO LOGIC<CR> --- GAME can change DOLBY PL2 & PL2x mode --- PL can change ONLY DOLBY PL2 mode Z2PSDELAY UP<CR> AUDIO DELAY UP/DOWN , direct change to ***dB Z2PSDELAY DOWN<CR> ***:000 to 999 by ASCII , 000=0ms, 200=200ms Z2PSDELAY 200<CR> ---AVR5805 can be operated from 0 to 200 function PARAMETER setting TONE DEFEAT ON/OFF SURROUND BACK SP MODE set ---MTRX ON = SURR. EX ON = DSCRT ON (@THX) (@ES DSCRT) 16/25 29. Mar. 06 PARAMETER function example PHONO Z3PHONO<CR> MULTI ZONE-3 mode set , and select source | | ---The name of PARAMETER is CDR/TAPE Z3CDR/TAPE<CR> the same as that of the time of SI COMMAND. SOURCE Z3SOURCE<CR> MULTI ZONE-3 mode cancel UP MULTI ZONE-3 VOLUME UP/DOWN , direct change to ***dB Z3UP<CR> DOWN Z3DOWN<CR> ** Z380<CR> **:00 to 99 by ASCII , 80=0dB, 99=---(MIN) ON Z3ON<CR> MULTI ZONE-3 ON/OFF change OFF Z3OFF<CR> Z3MU ON Z2MUON<CR> ZONE3 OUTPUT MUTE ON/OFF change OFF Z2MUOFF<CR> Z4 PHONO Z4PHONO<CR> MULTI ZONE-4 mode set , and select source | | ---The name of PARAMETER is CDR/TAPE Z4CDR/TAPE<CR> the same as that of the time of SI COMMAND. SOURCE Z4SOURCE<CR> MULTI ZONE-4 mode cancel UP MULTI ZONE-4 VOLUME UP/DOWN , direct change to ***dB Z4UP<CR> DOWN Z4DOWN<CR> ** Z480<CR> **:00 to 99 by ASCII , 80=0dB, 99=---(MIN) ON Z4ON<CR> MULTI ZONE-4 ON/OFF change OFF Z4OFF<CR> Z4MU ON Z2MUON<CR> ZONE4 OUTPUT MUTE ON/OFF change OFF Z2MUOFF<CR> SR PHONO REC SELECT mode set , and select source SRPHONO<CR> | ---The name of PARAMETER is | CDR/TAPE SRCDR/TAPE<CR> the same as that of the time of SI COMMAND. SOURCE REC SELECT mode cancel SRSOURCE<CR> Z3, Z4 COMMAND : "*" parameter uses two or three ASCII characters. (see page4 J) section) The BOLD COMMANDS are new. Z3 COMMAND 17/25 29. Mar. 06 EVENT(or RESPONSE) and PARAMETER list EVENT PW MV PARAMETER ON STANDBY ** function POWER ON/STANDBY change MASTER VOLUME change , **:00 to 98 by ASCII 98 = +18dB(MAX) 80 = 0dB 10 = -70dB 00 = -80dB 99 = ---(MIN) CHANNEL VOLUME change , **:00 to 62 by ASCII 62 = +12dB(MAX) 50 = 0dB 38 = -12dB(MIN) 00 = OFF (define ONLY SWch) example PWON<CR> PWSTANDBY<CR> MV80<CR> *RES. FL ** CVFL 50<CR> FR ** CVFR 50<CR> C ** CVC 50<CR> SW1 ** CVSW1 50<CR> SW2 ** CVSW2 50<CR> LFE ** CVLFE 50<CR> SLA ** CVSLA 50<CR> SRA ** CVSRA 50<CR> SLB ** CVSLB 50<CR> SRB ** CVSRB 50<CR> SBL ** (at SBch 2SP) CVSBL 50<CR> SBR ** (at SBch 2SP) CVSBR 50<CR> SB ** (at SBch 1SP) CVSB 50<CR> EXLA ** CVEXLA 50<CR> EXRA ** CVEXRA 50<CR> EXLB ** CVEXLB 50<CR> EXRB ** CVEXRB 50<CR> EXLC ** CVEXLC 50<CR> EXRC ** CVEXRC 50<CR> *RES. : NOT returns '*' parameters as RESPONSE. MV , CV COMMAND : "*" parameter uses two or three ASCII characters. (see page4 J) section) The BOLD COMMANDS are new. CV 18/25 29. Mar. 06 PARAMETER ON OFF SI PHONO CD TUNER DVD VDP TV DBS VCR-1 VCR-2 VCR-3 VCR-4 V. AUX CDR/TAPE DTU SV DVD VDP TV DBS VCR-1 VCR-2 VCR-3 VCR-4 V. AUX SOURCE The BOLD COMMANDS are new. MU EVENT function OUTPUT MUTE ON/OFF change INPUT source change VIDEO INPUT source change VIDEO SELECT mode cancel example MUON<CR> MUOFF<CR> SIPHONO<CR> SICD<CR> SITUNER<CR> SIDVD<CR> SIVDP<CR> SITV<CR> SIDBS<CR> SIVCR-1<CR> SIVCR-2<CR> SIVCR-3<CR> SIVCR-4<CR> SIV. AUX<CR> SICDR/TAPE<CR> SIDTU<CR> SVDVD<CR> SVVDP<CR> SVTV<CR> SVDBS<CR> SVVCR-1<CR> SVVCR-2<CR> SVVCR-3<CR> SVVCR-4<CR> SVV. AUX<CR> SVSOURCE<CR> *RES. 19/25 29. Mar. 06 EVENT MS PARAMETER function DIRECT SURROUND mode change PURE DIRECT STEREO MULTI CH IN MULTI CH IN +PL2x CINEMA MULTI CH IN +PL2x MUSIC MULTI CH DIRECT MULTI CH DIRECT +PL2x CINEMA MULTI CH DIRECT +PL2x MUSIC MULTI CH PURE D MULTI CH PURE D +PL2x CINEMA MULTI CH PURE D +PL2x MUSIC DOLBY PRO LOGIC DOLBY PL2 CINEMA DOLBY PL2 MUSIC DOLBY PL2 GAME DOLBY PL2x CINEMA DOLBY PL2x MUSIC DOLBY PL2x GAME DOLBY DIGITAL DOLBY D EX DOLBY D +PL2x CINEMA DOLBY D +PL2x MUSIC DTS NEO:6 CINEMA DTS NEO:6 MUSIC DTS SURROUND 20/25 example MSDIRECT<CR> MSPURE DIRECT<CR> MSSTEREO<CR> MSMULTI CH IN<CR> MSM CH IN+PL2X C<CR> MSM CH IN+PL2X M<CR> MSMULTI CH DIRECT<CR> MSM CH DRCT+PL2X C <CR> MSM CH DRCT+PL2X M <CR> MSMULTI CH PURE D<CR> MSM CH PURE D+PL2X C <CR> MSM CH PURE D+PL2X M <CR> MSDOLBY MSDOLBY MSDOLBY MSDOLBY MSDOLBY MSDOLBY MSDOLBY MSDOLBY MSDOLBY MSDOLBY PRO LOGIC<CR> PL2 C<CR> PL2 M<CR> PL2 G<CR> PL2X C<CR> PL2X M<CR> PL2X G<CR> DIGITAL<CR> D EX<CR> D+PL2X C<CR> *RES. MSDOLBY D+PL2X M<CR> MSDTS NEO:6 C<CR> MSDTS NEO:6 M<CR> MSDTS SURROUND<CR> 29. Mar. 06 PARAMETER DTS ES DSCRT6. 1 DTS ES MTRX6. 1 DTS+PL2x CINEMA DTS+PL2x MUSIC DOLBY H/P DTS+DOLBY H/P PL2x C+THX PL2 C+THX PL+THX NEO:6 C+THX THX5. 1 THX U2 CINEMA THX MUSIC MODE THX GAMES MODE THX6. 1 THX SURROUND EX WIDE SCREEN 5CH STEREO 7CH STEREO 9CH STEREO SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT MONO MOVIE MATRIX VIDEO GAME MPEG2 AAC AAC+DOLBY EX AAC+PL2x CINEMA AAC+PL2x MUSIC The BOLD COMMANDS are new. [. . . ] MS EVENT function ---Invalid ---Invalid ---Invalid ---Invalid at at at at AVR AVR AVR AVR model model model model example MSDTS ES DSCRT6. 1<CR> MSDTS ES MTRX6. 1<CR> MSDTS+PL2X C<CR> MSDTS+PL2X M<CR> MSDOLBY H/P<CR> MSDTS+DOLBY H/P<CR> MSPL2X C+THX MSPL2 C+THX MSPL+THX MSNEO:6 C+THX MSTHX5. 1<CR> MSTHX U2 CINEMA<CR> MSTHX MUSIC MODE<CR> MSTHX GAMES MODE<CR> MSTHX6. 1<CR> MSTHX SURROUND EX<CR> MSWIDE SCREEN<CR> MS5CH STEREO<CR> MS7CH STEREO<CR> MS9CH STEREO<CR> MSSUPER STADIUM<CR> MSROCK ARENA<CR> MSJAZZ CLUB<CR> MSCLASSIC CONCERT<CR> MSMONO MOVIE<CR> MSMATRIX<CR> MSVIDEO GAME<CR> MSMPEG2 AAC<CR> MSAAC+DOLBY EX<CR> MSAAC+PL2X C<CR> MSAAC+PL2X M<CR> *RES. 21/25 29. Mar. 06 EVENT PS TF TP TM PARAMETER function USER1 USER2 USER3 ROOM EQ:AUDYSSEY ROOM EQ mode direct change ROOM EQ:FRONT ROOM EQ:FLAT ROOM EQ:MANUAL ROOM EQ:OFF DELAY UP AUDIO DELAY change, ***:000 to 999 by ASCII DELAY DOWN ---AVR5805 200=200ms MAX DELAY *** 100=100ms, 000=0ms ****** (6 digits) TUNER Frequency change --- ****. ** kHz at AM band ****. ** MHz at FM band **(PRESET No. ) TUNER PRESET change to No. ** example Z2MSUSER1<CR> Z2MSUSER2<CR> Z2MSUSER3<CR> PSROOM EQ:AUDYSSEY<CR> PSROOM EQ:FRONT<CR> PSROOM EQ:FLAT<CR> PSROOM EQ:MANUAL<CR> PSROOM EQ:OFF<CR> PSDELAY UP<CR> PSDELAY DOWN<CR> PSDELAY 200<CR> TF105000<CR> (1050. 00kHz at AM) TPA1<CR> (PRESET No. "A1") TMAM<CR> TMFM<CR> TMAUTO<CR> TMMANUAL<CR> *RES. TUNER BAND , MODE change AM ---Band set to AM FM ---Band set to FM AUTO ---Tuning mode set to AUTO mode MANUAL ---Tuning mode set to MANUAL mode *RES. : NOT returns '*' parameters as RESPONSE. The BOLD COMMANDS are new. * * 22/25 29. Mar. 06 EVENT Z2CV Z2 PARAMETER FL ** FR ** C ** SW ** SL ** SR ** SBL ** SBR ** SB ** PHONO | CDR/TAPE SOURCE ** ON Z2ON<CR> OFF Z2OFF<CR> Z2MU ON Z2MUON<CR> ZONE2 OUTPUT MUTE ON/OFF change OFF Z2MUOFF<CR> Z2SV DVD Z2SVDVD<CR> ZONE2 VIDEO SELECT mode set , and select source VDP Z2SVVDP<CR> TV Z2SVTV<CR> DBS Z2SVDBS<CR> VCR-1 Z2SVVCR-1<CR> VCR-2 Z2SVVCR-2<CR> VCR-3 Z2SVVCR-3<CR> VCR-4 Z2SVVCR-4<CR> The PARAMETER of Z2, Z2CV EVENT : Uses two or three ASCII characters. (see page4 J) section) The BOLD COMMANDS are new. [. . . ]