User manual DENON AVR-3806

[. . . ] AV SURROUND RECEIVER AVR-3806 OPERATING INSTRUCTIONS 2 SAFETY PRECAUTIONS SAFETY INSTRUCTIONS 1. Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. [. . . ] To operate a DENON TAPE, preset "21471". ·, ª BAND MODE MEMO SRCH SFT CH +, ­ A~G 1~8 SRCH 0~9 : : : : : : : : : : : Tuning up/down Switch between AM, FM and XM bands Switch between AUTO and MANUAL Preset memory Search Switch preset channel range Preset channel up/down Preset channel range Preset channel XM channel direct search XM channel 48 Advanced Operation IR segment Advanced Operation 3 MODE SELECTOR Referring to the included List of Preset Codes ( End of this manual), press the NUMBER to input the preset code (a 5-digit number) for the manufacturer of the component whose signals you want to store in the memory. ·The top IR segment blinks once after each key press. ·If the remote recognizes the manufacturer's code, the IR segment blinks twice. Operating a component stored in the preset memory 1 2 Press the MODE SELECTOR button for the component you want to operate. Operate the component. You have 10 seconds to press each digit. If it takes longer than that, the remote "times out" and you must begin again. NOTE: · Depending on the model and year of manufacture, this function cannot be used for some models, even if the your device is listed on the included list of preset codes. · Some manufacturers use more than one type of remote control code. Refer to the included list of preset codes to change the number and check it out. For details, refer to the component's operating instructions. Some models cannot be operated with this remote control unit. · For the DVD player remote control buttons, function names may differ according to manufacturer. Compare with the remote control operation of the various components. NUMBER SETUP 2 The preset codes are as follows upon shipment from the factory and after resetting: Preset memory The included remote control unit (RC-1024) can be used to operate devices of different brands by registering the preset number corresponding to the brand of your device. For some models the remote control unit or the device may not operate properly. In this case, use the learning function ( page 52) to store your device's remote control signals in the included remote control unit. · TV, VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HITACHI · CD, DVD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DENON · SAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA DVD preset codes 41470 (default) 40490 1 2 Press the MODE SELECTOR button for the component you want to preset. Presetting is not possible for the AMP, ZONE2, ZONE3, TUNER and SYSTEM CALL modes. Press and hold the SETUP button for at least three seconds. · The top IR segment blinks twice. DVD-555 DVD-755 DVD-900 DVD-910 DVD-955 DVD-1000 DVD-1200 DVD-1500 DVD-1710 DVD-1910 DVD-2200 DVD-2800 DVD-2800II DVD-2900 DVD-2910 DVD-3800 DVD-3910 DVD-5900 DVD-5910 DVD-9000 DVM-715 DVM-1800 DVM-1805 DVM-1815 DVM-2815 DVM-4800 DENON Model No. DVD-800 DVD-1600 DVD-2000 DVD-2500 DVD-3000 DVD-3300 49 Advanced Operation 1. DVD player (DVD), DVD recorder (DVDR) system buttons 2. Satellite (SAT) tuner, cable (CABLE) system buttons 6, 7 2 1 8, 9 3 Advanced Operation : : : : : Manual search (forward and reverse) Stop Play Auto search (cue) Pause Default setting = SAT The preset codes of a CABLE can be recorded in the SAT/CBL mode so that the cable device can be operated ( page 49). It is only possible to set the preset memory for either the SAT or CBL. SRC ON SRC OFF 6, 7 2 1 8, 9 3 SETUP MENU c, d, b, a ENTER DISP CH +, ­ 0 ~ 9, +10 : : : : : : : : : : : : : : Power on Power off Manual search (forward and reverse) Stop Play Auto search (to beginning of track) Pause Setup Menu Cursor up, down, left and right Enter Display Switch channels +, ­ Number SRC ON SRC OFF SETUP DISP MENU c, d, b, a ENTER CH +, ­ 0 ~ 9, +10 : : : : : : : : : Power on Power off Setup Guide Menu Cursor up, down, left and right Enter Switch channels +, ­ Number When there are codes usable for the preset device, those codes are sent when the buttons below are pressed. If not, by default the DVD codes are punched through. If the punch through setting is made after the preset memory is set, the codes are sent with priority. Default setting = DVD The preset codes of a DVDR can be recorded in the DVD mode so that the DVD recorder can be operated ( page 49). It is only possible to set the preset memory for either the DVD or DVDR. 50 Advanced Operation 3. Monitor TV (TV), system buttons Advanced Operation When there are codes usable for the preset device, those codes are sent when the buttons below are pressed. If not, by default the DVD codes are punched through. If the punch through setting is made after the preset memory is set, the codes are sent with priority. 6, 7 2 1 8, 9 3 : : : : : Manual search (forward and reverse) Stop Play Auto search (cue) Pause SRC ON SRC OFF 6, 7 2 1 8, 9 3 SETUP MENU c, d, b, a ENTER DISP CH +, ­ 0 ~ 9, +10 : : : : : : : : : : : : : : Power on Power off Manual search (forward and reverse) Stop Play Auto search (to beginning of track) Pause Setup Menu Cursor up, down, left and right Enter Guide Switch channels +, ­ Number SRC ON SRC OFF SETUP MENU c, d, b, a ENTER DISP CH +, ­ 0 ~ 9, +10 TV/VCR : : : : : : : : : : Power on Power off Setup Menu Cursor up, down, left and right Enter Guide Switch channels +, ­ Number Switch between TV and video player 51 Advanced Operation IR segment Advanced Operation 4 5 Press the button that you wish to be learned. · The display will go off and the unit will enter the learning standby mode. MODE SELECTOR SYSTEM CALL If a button that cannot be "learned" is pressed, the IR segment lights and the learning setup mode is cancelled. The AMP/LAST button cannot be "learned". Point the remote control units directly at each other and press and hold in the button on the other remote control unit which you want to "learn". · The display turns on again and the IR segment blinks twice to indicate that the code is successfully captured. Other remote control unit NUMBER SETUP Learning function If an AV component is not a DENON product, or if it cannot be operated via codes provided in the AVR-3806 remote control's internal preset memory, or if its codes cannot be successfully learned by the AVR-3806 remote control, then you should use the remote control that was supplied with that AV component to operate the component. Other keys can be "learned" by repeating steps 4 and 5. [. . . ] *2: When playing Dolby Digital, DTS, DVD-audio and Super Audio CD. 94 Additional Information Signals and adjustability in the different modes Parameter (default values are shown in parentheses) Surround Mode PRO LOGICII/IIx MUSIC MODE only SUBWOOFER DELAY TIME ON/OFF PANORAMA DIMENSION PURE DIRECT, DIRECT DSD DIRECT DSD MULTI DIRECT MULTI CH DIRECT STEREO EXT. IN MULTI CH IN WIDE SCREEN DOLBY PRO LOGICIIx DOLBY PRO LOGICII DTS NEO:6 DOLBY DIGITAL DTS SURROUND 7CH STEREO SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT MONO MOVIE VIDEO GAME MATRIX VIRTURL E E E E E E E E E E E E E E E E E E E E C (30 msec) E C C E E E E E E E E E E E E E E E E E E E E E E E E E E E E C (OFF) C (OFF) E E E E E E E E E E E E E E E E E E E E C (3) C (3) E E E E E E E E E E E E CENTER WIDTH E E E E E E E E C (3) C (3) E E E E E E E E E E E E NEO:6 MUSIC MODE only CENTER IMAGE E E E E E E E E E E C (0. 3) E E E E E E E E E E E EXT. IN only Additional Information SW ATT E E E E E C E E E E E E E E E E E E E E E E C : Signal / Adjustable E : No signal / Not adjustable B : Turned on or off by speaker configuration setting C : Adjustable E : Not adjustable 95 Additional Information Additional Information 2 Differences in surround mode names depending on the input signals Button DTS Surround Mode STANDARD DTS SURROUND DTS ES DSCRT6. 1 DTS ES MTRX6. 1 DTS SURROUND DTS 96/24 DTS + PLIIx CINEMA DTS + PLIIx MUSIC DTS + NEO:6 DTS NEO:6 CINEMA DTS NEO:6 MUSIC DOLBY SURROUND DOLBY DIGITAL EX DOLBY DIGITAL DOLBY DIGITAL+PLIIx CINEMA DOLBY DIGITAL+PLIIx MUSIC DOLBY PRO LOGICIIx CINEMA DOLBY PRO LOGICIIx MUSIC DOLBY PRO LOGICIIx GAME DOLBY PRO LOGICII CINEMA DOLBY PRO LOGICII MUSIC DOLBY PRO LOGICII GAME DOLBY PRO LOGIC MULTI CH IN MULTI CH IN MULTI IN + PLIIx CINEMA MULTI IN + PLIIx MUSIC 4: B: C: E: Mode selectable in initial status Mode fixed when AFDM is ON Selectable mode Non-selectable mode *1 *1 E E E E E E E C C E E E E C C C C C C C E E E E E E E E E E C C E E E E C C C C C C C E E E 4B E C E C C E E E E E E E E E E E E E E E E E E 4B C E C C C E E E E E E E E E E E E E E E E E E 4 E C C C E E E E E E E E E E E E E E E E E E E 4 C C C E E E E E E E E E E E E E E E E E E E E E E E E E C C 4B C E E E E E E E E E E E E E E E E E E E C 4 C C E E E E E E E E E E E E E E E E E E E C 4 C C E E E E E E E E E E E E E E E E E E E C 4 C C E E E E E E E E E E E E E E E E E C C E E E E 4 C C C C C C E E E E E E E E E E E E E E E E E E E E E E E 4 C C E E E E E E E C C E E E E C C C C C C C E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E 4 C C E E E E E E E C C E E E E C C C C C C C E E E Note ANALOG LINEAR PCM DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5. 1ch) DTS 96/24 Input signals DOLBY DIGITAL DOLBY DIGITAL DOLBY DOLBY DIGITAL EX EX DIGITAL (With Flag) (With no Flag) (5. 1ch) DOLBY DIGITAL (3, 4, 5ch) DOLBY DIGITAL (2ch) DVD-Audio (multi ch) DVD-AUDIO DVD176. 4/ Audio 192kHz (2ch) Super Audio CD DSD (multi ch) DSD (2ch) *2 *1 *1 *1 *2 *1 *2 *1 NOTE : *1: This mode is not available when the Surround Back speaker setup is set to "None". *2: This mode is not available when the Surround Back speaker setup is set to "1spkr" or "None". 96 Additional Information Button DTS Surround Mode DIRECT DIRECT DSD DIRECT DSD MULTI DIRECT MULTI CH DIRECT M DIRECT + PLIIx CINEMA M DIRECT + PLIIx MUSIC PURE DIRECT PURE DIRECT DSD PURE DIRECT DSD MULTI PURE MULTI CH PURE DIRECT M PURE D + PLIIx CINEMA M PURE D + PLIIx MUSIC DSP SIMULATION WIDE SCREEN SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT MONO MOVIE VIDEO GAME MATRIX VIRTUAL 7CH STEREO STEREO STEREO 4 : Mode selectable in initial status C : Selectable mode E : Non-selectable mode NOTE : *1: This mode is not available when the Surround Back speaker setup is set to "None". *2: This mode is not available when the Surround Back speaker setup is set to "1spkr" or "None". [. . . ]