User manual DENON AVR-391E3

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. · DECLARATION DE CONFORMITE Nous déclarons sous notre seule responsabilité que l'appareil, auquel se réfère cette déclaration, est conforme aux standards suivants: EN60065, EN55013, EN55020, EN61000-3-2 et EN61000-3-3. D'après les dispositions de la Directive 2006/95/EC et 2004/108/EC. Um dieses Gerät vollständig von der Stromversorgung abzutrennen, ziehen Sie bitte den Stecker aus der Wandsteckdose. Der Netzstecker wird verwendet, um die Stromversorgung zum Gerät völlig zu unterbrechen; er muss für den Benutzer gut und einfach zu erreichen sein. PRECAUTION: · DICHIARAZIONE DI CONFORMITÀ Dichiariamo con piena responsabilità che questo prodotto, al quale la nostra dichiarazione si riferisce, è conforme alle seguenti normative: EN60065, EN55013, EN55020, EN61000-3-2 e EN61000-3-3. [. . . ] ­10dB : Set the maximum volume to ­10 dB. 0dB : Set the maximum volume to 0 dB. a Amp Assign Define how the amplifier for the surround back speaker channels is used. The places where the surround back amplifier are used can be set freely according to the usage environment. This makes it possible to play the sound with high quality using the front speakers (bi-amp connections). Power On Level This sets the volume set when the power is turned on. f On-Screen Display Make on-screen display related settings. [Selectable items] Last ­­­ : Use the memorized setting from the last session. : Always use the muting on condition when power is turned on. in units of 1 dB. Screensaver Make screensaver settings. Use the screensaver to prevent burn-in on the monitor screen. When set to "ON" the screensaver is activated if there is no activity , for about 3 minutes. [Selectable items] 7. 1ch FrontA Bi-Amp FrontB Bi-Amp 2ch ­80dB ~ +18dB : Set the volume level when the power is turned on Mute Level For details, see "Amp Assign Connections and Operations" (vpage 52, 53). This sets the amount of attenuation of the volume when the mute mode is set. [Selectable items] ON OFF : Activate the screensaver if there is no activity for about 3 minutes. : Turn the screensaver function off. [Selectable items] Full : The sound is cut off entirely. Text Input source and mode display. ­40dB : The sound is attenuated by 40 dB. ­20dB : The sound is attenuated by 20 dB. [Selectable items] ON OFF : Turn display on. PCM DTS Rename Change the display name for this source. Names containing up to 5 characters can be input. Getting Started [Characters that can be input] A~Z a~z 0~9 !@ [ \ ] (space) Connections [Input source] TUNER [Selectable items] Analog : Play only signals from analog input. [Input source] CD AUX V. AUX [Selectable items] AUTO PCM DTS Analog EXT. IN : Detect type of digital input signal and decode and play automatically. : Decode and play only PCM input signals. : Decode and play only DTS input signals. IN input. Assign Assign input sources to input connectors. Setup CDR DVD/HDP TV/CBL VCR GOperation on the main remote control unitH Press the INPUT button. IN PCM Analog DTS HDMI Select HDMI connector to assign to this source. Playback [Input source] DVD/HDP TV/CBL VCR V. AUX Remote Control Amp Assign Information [Selectable items] HDMI1 : Assign HDMI1 input connector. None : No HDMI input connector assigned. Input source Default setting DVD/HDP HDMI1 TV/CBL HDMI2 VCR None V. AUX None · Only set "PCM" and "DTS" when playing the respective signals. · When a digital signal is properly input, the " " indicator lights on the display. [. . . ] · The video conversion function does not work for the REC OUT connectors. Match the input source and recorder connections. Most movie software includes copy prevention signals and cannot be copied. Page 11 ~ 17 ­ 34 ­ Cause Countermeasure · The "Manual Setup" ­ "HDMI · Set to "TV" . [. . . ]