User manual DENON AVR-4308CI

[. . . ] GraphicalUserInterface Use this manual in combination with the operating guide displayed on the GUI screen. GUI Menu Operation (vpage 23) GUI Menu Map (vpage 24) AV SURROUND RECEIVER AVR-4308CI Owner's Manual n SAFETY PRECAUTIONS 1. SAFETY INSTRUCTIONS Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. Follow Instructions ­ All operating and use instructions should be followed. [. . . ] L/R" or "Audyssey Flat" is selected, or when the auto setup measuring results have changed, " " lights. Information The tone cannot be adjusted when in the DIRECT mode. Bass Adjust low frequency range (bass). [Variable range] ­6dB ~ +6dB · "Audyssey" "Audyssey Byp. L/R" and "Audyssey Flat" can be , selected after the auto setup procedure has been performed. · If the settings of the speakers for which "None" has been determined at "Auto Setup" are changed, "Audyssey" "Audyssey Byp. L/R" and , "Audyssey Flat" cannot be selected and measurements have to be taken again to include the newly-added speakers. · When using headphones, "Room EQ" is always set to "OFF" . About the RESTORER function · Such compressed audio formats as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with compressed audio signals. · This is displayed on the GUI menu and can be set when the input source is set to "XM" "HD Radio" or "NET/USB" or when analog , , signals (including AM/FM signals) or PCM signals (fs = 44. 1/48 kHz) are input. Troubleshooting Treble Adjust high frequency range (treble) . Specifications [Variable range] ­6dB ~ +6dB "Bass" and "Treble" can be set when "Tone Defeat" is set to "OFF" . g Night Mode Optimized setting for late-night listening. [Selectable items] OFF Low Middle High Picture Adjust Adjust the picture quality. F Menu tree F Parameter Picture Adjust a Contrast s Brightness d Chroma Level f Hue Getting Started Connections Setup Setup Playback Remote Control Multi-Zone Information Troubleshooting Specifications Information Status Shows information about current settings. F Menu tree F Information Status a MAIN ZONE s ZONE2/3/4 Operating from the main remote control unit Press the NGT button. The " " indicator lights when "Low" "Middle" or "High" is , selected. OFF Low High Middle h Audio Delay Compensate for mismatched timing between video and audio. Delay audio. This sets the delay time for audio signals. a Contrast Adjust picture contrast. [Variable range] ­6 ~ 0 ~ +6 s Brightness Adjust picture brightness. [Variable range] 0 ~ +12 a MAIN ZONE Shows information about settings for main zone. The items displayed differ according to the input source. [Items to be checked] Select Source Assign Night Mode Name Surround Mode Input Mode Rec Select Room EQ Video Select Src Level [Variable range] 0 ms ~ 200 ms Operating from the main remote control unit q Press the A. w Use the o p button to set. d Chroma Level Adjust picture chroma level (saturation). [Variable range] ­6 ~ 0 ~ +6 RESTORER etc. · This cannot be adjusted when playing in the EXT. IN, DIRECT or STEREO mode (with "Front" set to "Large" "Tone Defeat" to "ON" , and "Room EQ" to "OFF"). · The adjustment range is 0 to 100 ms when the Auto Lipsync Correction function is activated. f Hue Adjust color hue. [. . . ] · Reposition your XM Mini-Tuner and Home Dock antenna. · The selected channel is not · Select another channel. · The XM Mini-Tuner is not · Contact XM Radio. · The selected channel is not · Consult the latest channel available. [. . . ]