User manual DENON AVR-4810CI

[. . . ] b Les illustrations des boutons présentes dans ce manuel servent à expliquer le fonctionnement de la télécommande. Vous pouvez contrôler l'appareil à l'aide du bouton portant le même nom sur la façade de l'appareil. b Le illustrazioni dei pulsanti mostrate in questo manuale di spiegazione si riferiscono al telecomando. E' possibile adoperare l'unità utilizzando i pulsanti del nome corrispondente presenti sul pannello frontale dell'unità. [. . . ] · Absolute : The volume is displayed within the range of 0, 1 ~ 99. Vol. Limit : Make a setting for maximum volume. · OFF : Do not set a maximum volume. · ­20dB(61) / ­10dB(71) / 0dB(81) Power On Level : This sets the volume set when the MAIN ZONE's power is turned on. · Last : Use the memorized setting from the last session. · ­ ­ ­ : Always use the muting on condition when power is turned on. · ­80dB(1) ~ +18dB(99) : The volume is adjusted to the set level. Mute Level : This sets the amount of attenuation of the volume when the mute mode is set in the MAIN ZONE. · ull : The sound is cut off entirely. F · ­40dB : The sound is attenuated by 40 dB. · ­20dB : The sound is attenuated by 20 dB. · OFF : Turn display off. 0 Remote control operation buttons Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu ENGLISH Making detailed settings (Manual Setup) Setting items Setting contents Setting items Quick Select Name Setting contents Default : The changed display names are reset to the defaults. · No : Do not reset to the defaults. Getting Started On-Screen Display Tuner Information : This sets the time the on-screen display is displayed Make the settings related to when a tuneroperation is performed. · lways : Show display continuously. A · 30sec : Show display for 30 seconds after operation. · 10sec : Show display for 10 seconds after operation. iPod Information : This sets the time the on-screen display is displayed when an iPodoperation is performed. · lways : Show display continuously. A · 30sec : Show display for 30 seconds after operation. · 10sec : Show display for 10 seconds after operation. Quick Select Name Rename Label : Change the display name of the selected "Quick Select" Change the Quick Select setting. Use ui to select the name of the Quick Select setting you want to change, then press . [. . . ] · Set when "Manual Setup" ­ "On-Screen Display" ­ "Tuner · The display during iPod operation Information" is not "OFF" . · Set when "Manual Setup" ­ "On-Screen Display" ­ " iPod Information" is not "OFF" . 15 ­ 9 30 30 31 31 2 ENGLISH GHDMIH Symptom HDMI audio signals are not output from speakers. Cause Countermeasure · The "Manual Setup" ­ "HDMI · Set to "Amp" Setup" ­ "HDMI Audio Out" setting is set to"TV" Page 28 Restoring all the settings to as they were at the time of purchase (Resetting the Microprocessor) Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. Getting Started Connections No picture appears with HDMI connections. No sound is output from the monitor connected with HDMI connections. [. . . ]