User manual DENON AVR-989

[. . . ] Be sure to keep this manual for future reference should any questions or problems arise. PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO THE REAR OF THE CABINET FOR FUTURE REFERENCE" caractéristiques qu'offre cet appareil, lire avec soin ces instructions et bien utiliser l'appareil. Toujours conserver ce mode d'emploi pour s'y référer ultérieurement en cas de question ou de problème. DE SERIE PRIERE DE NOTER LE NUMERO DE SERIE DE L'APPAREIL INSCRIT A L'ARRIERE DU COFFRET DE FAÇON A POUVOIR LE CONSULTER EN CAS DE PROBLEME. " ENGLISH FRANCAIS 2 SAFETY PRECAUTIONS FCC INFORMATION (For US customers) 1. [. . . ] · £ OFF The power turns off and indicator is off. In this position, the power cannot be turned on and off from the remote control unit. 2 Turn on the power. Press the Power ON/STANDBY switch (button). ON / STANDBY (Main unit) (Remote control unit) When pressed, the power turns on and the display lights. The sound is muted for several seconds, after which the unit operates normally. When pressed again, the power turns off, the standby mode is set and the display turns off. 3 3 Select the front speakers. Press the SPEAKER A or B button to turn the speaker on. SPEAKER A B (Main unit) (Remote control unit) · The front speaker A, B setting can be also be changed with the SPEAKER button on the remote control unit. 39 ENGLISH Playing the input source 11 2 5 3 1 3 5 1 Select the input source to be played. Example: CD FUNCTION (Main unit) (Remote control unit) 2 Input mode selection function Different input modes can be selected for the different input sources. The selected input modes for the separate input sources are stored in the memory. q AUTO (auto mode) In this mode, the types of signals being input to the digital and analog input jacks for the selected input source are detected and the program in the AVR-989/885's surround decoder is selected automatically upon playback. This mode can be selected for all input sources other than PHONO and TUNER. The presence or absence of digital signals is detected, the signals input to the digital input jacks are identified and decoding and playback are performed automatically in DTS, Dolby Digital or PCM (2 channel stereo) format. IN) jacks 1 Set the external input (EXT. IN button to switch the external input. EXT. IN 21 (Main unit) (Remote control unit) Once this is selected, the input signals connected to the FL (front left), FR (front right), C (center), SL (surround left) and SR (surround right) channels of the EXT. IN jacks are output directly to the front (left and right), center and surround (left and right) speaker systems as well as the pre-out jacks without passing through the surround circuitry. In addition, the signal input to the SW (subwoofer) jack is output to the PRE OUT SUBWOOFER jack. 2 Cancelling the external input mode To cancel the external input (EXT. IN) setting, press the INPUT MODE (AUTO, PCM, DTS) or ANALOG button to switch to the desired input mode. (See page 40. ) INPUT MODE ANALOG 2 1 (Main unit) (Remote control unit) · When the input mode is set to the external input (EXT. IN), the play mode (DIRECT, STEREO, STANDARD (DOLBY/DTS SURROUND), 5CH/7CH STEREO or DSP SIMULATION) cannot be selected. NOTES: · In play modes other than the external input mode, the signals connected to EXT. In addition, signals cannot be output from channels not connected to the input jacks. · The external input mode can be set for any input source. To watch video while listening to sound, select the input source to which the video signal is connected, then set this mode. [. . . ] · Improper position of the audio function button. · Digital signals not input Digital input selected. · Speaker terminals are short-circuited. · Block the ventilation holes of the set. 14, 15 40 41 43 41 14, 15 5, 14 DISPLAY not lit and power indicator is flashing rapidly. [. . . ]