User manual DENON DN-F450R

[. . . ] SOLID STATE RECORDER DN-F450R Owner's Manual PORTUGUS SVENSKA NEDERLANDS ESPAOL ITALIANO FRANAIS DEUTSCH ENGLISH IMPORTANT TO SAFETY WARNING: CAUTION 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. [. . . ] ALC: The DN-F450R automatically sets the recording level. Setting Items Skip Back Sets the amount of time used for skipping back a track. Setting details 0. 5 sec 10 sec: Sets the time by increments of 0. 5 seconds. 10 sec 60 sec: Sets the time by increments of 5 seconds. -6dB / -12dB / -20dB / -38dB / -54dB Auto Track Creates a new file for each recording time set and continues recording. You can use this setting for various purposes besides the level meter on the display. For example, confirmation of the recording peak level and confirmation of the presence or absence of input signals. Off: Record without creating a new file. 1 min/ 5 mins/ 10 mins/ 15 mins/ 30 mins/ 1 hour/ 2 hours/ 6 hours/ 8 hours/ 12 hours/ 24 hours Play Mode Selects the play mode. NOTE If the size of the recorded file exceeds 4GB, recording is continued on a new file irrespective of the set time. There could be sound cutoffs for a short period of time between files depending on the capacity of a recorded file. FinishMod (Finish Mode) Sets the stop status when playback is stopped. Repeat Sets the file to repeat playback. The skip back function rewinds a track for the set amount of time from the current playback position during playback or pause. This function is useful when you perform remote control functions using the Remote 2 expanded function switches. For details on the remote control, see "Expanding remote functions" (vpage 27). Cont (Continuous) : Plays files in numerical order. Playback stops when the final file has finished playing. Single: When the file has finished playing, it is stopped in the stop position set in "Finish Mode". Playback stops when all files have finished playing. Next: When the STOP button is pressed during file playback, playback is stopped at the head of the next file. Recue: When the STOP button is pressed during file playback, playback is stopped at point where playback was previously started. On: Repeat playback is performed. Auto Mark When input lower than the input level set in "10 Silent Level" continues for more than 3 seconds, marking information is written into the file. This mark is useful when searching for a specific point during playback. SilentSkp (Silent skip) If input lower than the input level set in "10 Silent Level" continues for more than 3 seconds, recording is temporarily stopped. Recording is restarted when input above the set level is received again. [. . . ] This unit recognizes only the folders stored immediately under the root folder. Check whether the number of folders does not exceed 32. Page 23 23 8 Getting started Part names and functions Connections No sound is produced Make sure that the headphone volume level adjustment switch from the headphones. Check whether sound is reproduced from the headphones by using another audio file or SD card. [. . . ]