User manual DENON DN-S1200

[. . . ] CD/USB MEDIA PLAYER & CONTROLLER DN-S1200 Owner's Manual n SAFETY PRECAUTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN U. S. A. , Canada models CAUTION IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 7 Do not block any ventilation openings. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] Doing so could damage the CD mechanism and lead to malfunction. r D-Link connector Terminal for connecting another DN-S1200. Exchange of memo data, keyboard data and relay command information is performed with another DN-S1200. b Do not connect anything other than a DNS1200. b Use an RJ45 cross cable no longer than 3 meters for connection. t USB B port · USB MIDI and HID commands are sent from the DN-S1200 to the computer. · USB MIDI and HID commands as well as USB AUDIO signals are received from the computer. Display o MEMO indicator This indicates whether or not there is memo data. When in the play or standby mode, the "MEMO" indicator lights if there is memo data for the current track. In the playlist search mode in the USB mode, the indicator flashes if there is memo data for the selected playlist. In the CD mode when D-Link is possible, the "MEMO" indicator flashes if data is stored in the USB memory connected to the other DNS1200. Getting Started Q6 Q5 Q4 Q3 Q2 Q1 Q0 Connections Playback Basic Operations Memo Function Q0 Pitch display This indicator display the playback speed (pitch). Q1 BPM indicators q q Play position indicator w e r tyu i o Lights when the BPM is displayed on the pitch display. Q2 Play mode indicators When "SINGLE" indicator lights up, playback will finish at end of current file. indicator lights up, playback " continues. e Character display section With the DN-S1200, mode selection and other operations can be performed following the character display and using the PARAMETERS knob. The PARAMETERS indicator flashes when data can be entered using the PARAMETERS knob. The position of playback is indicated by the elapsed time, in white when in the normal play mode, in orange when in the reverse play mode. When the time to the end of the track (file) is less than the specified time, the play position indicator flashes according to the remaining track time (EOM) to indicate the end of the track (file). or Left arrow only on: Hot Start mode Both arrows on: Seamless Loop mode , , Both arrows flashing: Left arrow on, right flashing: Seamless Loop Playing Exit play from Seamless Loop Q3 Minute, second and frame displays These displays information. indicate current position Q4 Time mode indicators When the TIME button is pushed, the Time mode indicator switches as follows. ELAPSED: File's elapsed time is displayed. REMAIN: File's remaining time is displayed. ELAPSED: The total elapsed time of Playlist is displayed. REMAIN: The total remaining time of Playlist is displayed. Utility The character display section indicates the operation, mode name, data, etc. ">> " is indicated at the side of the displayed data. When ">> " is flashing, this indicates that the item at that row is selected. Specifications r File data indicator This indicates the file's format. Q5 Track indicator The number of the currently playing track is displayed here when in the playlist or CD mode. t D-Link connection confirmation indicator This lights when D-Link connection has been confirmed. Q6 SOURCE display This displays the device currently selected for the different decks. w Loop mode indicators DN-S1200 has Loop mode indicators which consist of A , B and two arrows. A and B marks indicate A and B points have been set. Two arrows indicate loop setting mode as follows. y Keyboard connection indicator Deck for which keyboard is effective is now displayed. u KEY ADJ. indicator appears in display when the Key Adjust mode is ON. i Scratch marker This turns according to the playing status of the different decks. [. . . ] When the remaining time in the currently playing track reaches the specified time, the play position indicator flashes to notify you that the end of the track is approaching. (21) Relay:ON / OFF* Set "Relay Mode" to "ON / OFF" . (22) Region:USA* / Other Select the same region as the region set on the computer on which "DENON Music Manager" is installed. (9) Fader Mode (FADER START MODE):2LP/Cue* / 2LP/Pas / 1LP/Cue / 1LP/Pas After selecting the data, press the knob and change the preset data. PARAMETERS Select 2-line type (Play / Cue) or 2 line type (Play / Pause) or 1 line type (Play / Cue) or 1 line type (Play / Pause). (23) KB Type:ENGLISH (US)* / ENGLISH (UK) / DEUTSCH / FRANCAIS / ITALIANO/ ESPANOL / NEOERLANOS / SVENSKA / CHINESE / JAPANESE Select the language type of the keyboard being used. b To set multiple presettings, repeat steps 2 ~ 5. (10) Pitch:Pitch ON* / Key AdjON (KEY ADJUST ON) / Pitch OFF Select the pitch mode when the power is turned on. (24) MIDI CH Set:1* to 6 Select the MIDI channel. The preset mode is turned off when the PRESET, CUE (11) Play Mode:Single / Cont. / Play Lock* Select the play mode when the power is turned on. (25) JOG Trns Int:1ms to 20ms (The default is 3 ms. ) Select the MIDI channel. or 1 3 button is pressed. (12) Time Mode:Elapsed* / Remain Select the time mode when the power is turned on. (26) Unit No Set:1to14/ALL* Select the device's unit number. [Example] If two units of DN-S1200s are connected to the computer, set one unit to No. 1, the other to No. 2. (13) TT Tricks:ON / OFF* Select the JOG operation when you scratch in the BRAKE mode. (14) Audio Curve:ON* / OFF Select "OFF" for Serato Scratch Live or other "control signal" programs. For more information about SeratoTM, products please visit their website "www. scratchlive. net" . (27) Version No:The DN-S1200's software version is displayed. [. . . ]