User manual DENON DN-S3700

[. . . ] Digital Media Turntable DN-S3700 Owner's Manual n SAFETY PRECAUTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN U. S. A. , Canada models CAUTION IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 7 Do not block any ventilation openings. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] b Not compatible with USB hubs Utility e Digital output terminal (DIGITAL OUT) · Digital data is available from these terminals. · Use 75 /ohms pin cord for connection. · We recommend you use braided wire type shielded cable. Specifications i POWER ON/OFF button Push this button to turn power on and off. NOTE Do not turn off the power while a disc is loading or ejecting. Doing so could damage the CD mechanism and lead to malfunction. NOTE The playback level after analog conversion is set to ­6 dB below the usual level to avoid digital distortion. r PS/2 connector Terminal for connecting a PS/2 keyboard. t D-LINK connector Terminal for connecting another DN-S3700. Exchange of memo data, keyboard data and relay command information is performed with another DN-S3700. b Do not connect anything other than a DNS3700. b Use an RJ45 cross cable no longer than 3 meters for connection. Display r File data indicators This indicates the file's format. Q1 WFM indicator This lights when there is waveform data in the ID3 tag of the file on the USB device. Getting Started Connections Playback Basic Operations Memo Function Utility Specifications t D-LINK connection confirmation indicator Q9 Q8 Q7 Q6 Q5 Q4 Q3 Q2 This lights when D-LINK connection has been confirmed. Q2 PITCH, BPM display This indicator display the playback speed (pitch) or BMP . y Keyboard connection indicator Deck for which keyboard is effective will be displayed. Q3 BPM indicator Lights when the BPM is displayed on the pitch display. u KEY ADJ. indicator appears in display when the Key Adjust mode is ON. Q4 PITCH indicator This lights when the pitch is displayed on the pitch section of the display. i MEMO indicator This indicates whether or not there is memo data. When in the play or standby mode, the "MEMO" indicator lights if there is memo data for the current track. In the playlist search mode in the USB mode, the indicator flashes if there is memo data for the selected playlist. In the CD mode when D-LINK is possible, the "MEMO" indicator flashes if data is stored in the USB memory connected to the other DNS3700. Q5 Play mode indicators When "SINGLE" indicator lights up, playback will finish at end of current file. indicator lights up, playback " continues. qw e q Play position indicator r ty u io Q0 Q1 Q6 Minute, second and frame displays These displays information. indicate current position The position of playback is indicated by the elapsed time, in blue when in the normal play mode, in reversal display when in the reverse play mode. When the time to the end of the track (file) is less than the specified time, the play position indicator flashes according to the remaining track time (EOM) to indicate the end of the track (file). Q7 Time mode indicators When the TIME button is pushed, the Time mode indicator switches as follows. ELAPSED: File's elapsed time is displayed. REMAIN: File's remaining time is displayed. ELAPSED: The total elapsed time of Playlist is displayed. REMAIN: The total remaining time of Playlist is displayed. o Visual marker This turns according to the playing status of the different decks. Use this as an indicator for scratching and other JOG operations. w Point indicators These indicate the cue point, the hot start point, the A and B points, the break point and the auto loop point. e Character and Waveform display section With the DN-S3700, mode selection and other operations can be performed following the character display and using the PARAMETERS knob. The PARAMETERS indicator flashes when data can be entered using the PARAMETERS knob. There are two modes for the character and waveform display. [. . . ] 1) To clear the PRESET data, push the PARAMETERS button. "Preset Init OK?" flashes on the character display. "Preset Initial!" is displayed on the character display while data clearing. 3) Once clearing is completed, "Complete!" is displayed. Compatible Files NOTE Getting Started The files that can be played using an external USB memory device are as shown below. · Depending on the type of MP3 encoding software, with some files noise may be generated or it may not be possible to play the file. [. . . ]