User manual DENON DN-V310

[. . . ] DVD VIDEO PLAYER DN-V210/DN-V310 USER GUIDE MODE D'EMPLOI GUÍA DEL USUARIO IMPORTANT TO SAFETY WARNING: To reduce the risk of fire and electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus LABELS (for U. S. A. model only) CERTIFICATION THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR REFOR-MANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. CAUTION 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. [. . . ] ORIGINAL The video is displayed in its original size. AUTO FIT (Factory default) The video is displayed with the size automatically adjusted so there is no distortion. A black band may appear at the right and left sides or the at top and bottom. PANSCAN Select when you connect a 4:3 television to this device. A section of the video on one or both sides of the screen is cut. NOTE: · If stripes of noise appear on the picture or the picture is unclear when playing a specific DVD video disc, try changing the video mode. To exit the setup mode Press the SETUP button. VIDEO SETUP HDMI RES. TV ASPECT TV TYPE BRIGHTNESS SHARPNESS VIDEO OUT VIDEO MODE AUTO 4:3 PS NTSC BASIC BASIC COMPONENT FULL SELECT: SET BRIGHTNESS SET: ENTER BUTTON t VIDEO SETUP HDMI RES. TV ASPECT TV TYPE BRIGHTNESS SHARPNESS VIDEO OUT VIDEO MODE AUTO 4:3 PS NTSC BASIC BASIC COMPONENT FULL SELECT: SET SHARPNESS SET: ENTER BUTTON 3 y VIDEO SETUP HDMI RES. TV ASPECT TV TYPE BRIGHTNESS SHARPNESS VIDEO OUT VIDEO MODE AUTO 4:3 PS NTSC BASIC BASIC COMPONENT FULL SELECT: SET VIDEO OUT SET: ENTER BUTTON u VIDEO SETUP HDMI RES. TV ASPECT TV TYPE BRIGHTNESS SHARPNESS VIDEO OUT VIDEO MODE AUTO 4:3 PS NTSC BASIC BASIC COMPONENT FULL SELECT: SET VIDEO MODE SET: ENTER BUTTON 25 ENGLISH r When "AUDIO SETUP" is selected ENGLISH TOP MENU /PBC MENU 2, 3 ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE PLAY SLOW/SEARCH SKIP SETUP NTSC/PAL ZOOM SLIDE SHOW 1 1 Set the "AUDIO SETUP" in SETUP mode. (See page 20. ) Use the 5 and cursor buttons to select the desired setting. DIGITAL OUTPUT Use this to select the digital output's signal format. 96k LPCM OUT Use this to set the digital audio output when playing DVDs recorded in linear PCM audio. Remote control unit 2 DYNAMIC RANGE This has the effect of reducing the size difference between audio outputs. Even if the audio output is set to MIN, you can still hear audio or conversations. NOTE: · Dynamic range is displayed when the "SETUP MENU MODE" at "SYSTEM SETUP" is set to "EXPERT". AUDIO SETUP DIGITAL OUTPUT 96K LPCM OUT DYNAMIC RANGE PCM 96k MAX SELECT: SET DIGITAL OUT SET: ENTER BUTTON 3 Press the ENTER button to decide the menu item. q When "DIGITAL OUTPUT" is selected: Use the 5 and cursor buttons to select the output format, press the ENTER button to decide. NORMAL When playing DVDs recorded in Dolby Digital or DTS, bitstream signals are output from the digital audio output terminals. When playing DVDs recorded in linear PCM, linear PCM signals are output. Select "NORMAL" when making digital connections to an AV amplifier with built-in Dolby Digital and DTS decoder. PCM (Factory default) When playing Dolby Digital bitstream signals or DVDs recorded in linear PCM, the signals are converted into 48 kHz/16-bit PCM (2channel) signals and output from the digital outputs. When playing DVDs recorded in PCM, linear PCM signals are output. [. . . ] · For some discs the audio (or subtitle) language cannot be switched when the operation to switch it is performed, but can be switched on the menu screens. · The angle cannot be switched for DVDs which do not contain multiple angles. In some cases multiple angles are only recorded for specific scenes. · Check the "RATING" setting. [. . . ]