User manual DENON DN-X300

[. . . ] Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation. Do not open the top cover In order to prevent electric shock, do not open the top cover. If problems occur, contact your DENON dealer. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Do not let insecticides, benzene, and thinner come in contact with the apparatus. Never disassemble or modify the apparatus in any way. Select any source from eight inputs (PHONO1/LINE1, You also can assign the same input to several channels for creative mixing. Please check to make sure the following items are included with the main unit in the carton: q Operating instructions . You have purchased the DENON DN-X300/DN-X900 DJ mixer from D&M HOLDINGS lnc. Matrix input assignment 8 input sources are freely assignable to each channel. Only DN-X900 : 8 input sources +4 DIGITAL sources are freely assignable to each channel. 60 MM Channel Fader (Replaceable) 60mm long-stroke channel fader for precise adjustment of the volume. Can be replaced with a rotary type (optional). Level Mater per Channel Easily visible 12- dot level meters for each channel. 3-Band equalizer/gain LOW, MID, HI and GAIN controls are available on every input channel. These switches set Line level inputs when Turntable is not connected. Serves two purposes In the STEREO mode it changes the relative levels of the Cue and Program mixed together in both ear cups. In the MONO mode it changes the balance between the Mono Cue in the left ear cup and the Mono Program in the right. This stereo pair of RCA jacks provides a unbalanced line level output. The track number is switched when this button is pressed during recording onto a digital recorder using the digital outputs. This screws provide a place to connect the ground wire from a turntable. This terminal is exclusively for a turntable grounding and not a safety earth ground. These XLR type connectors provide a balanced line level output with independent front panel Zone Level controls and are not affected by the Master Level control. Pressing multiple buttons makes it possible to derive mixed sound from the selected sources. Only DN-X900 : ZONE level control Accepts either a balanced microphone with an XLR connector or a balanced microphone with 1/4" TRS mono jacks. Select when you don't assign the channel source into the Crossfader. [. . . ] Quality cables make a big difference in fidelity and punch. Be sure plugs and jacks are securely fastened. Loose connections cause hum, noise, or intermittence that could damage your speakers. Then connect any effects into the stereo Effect, if used. [. . . ]