User manual DENON DVD-1730

[. . . ] DVD VIDEO PLAYER DVD-1730 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN : CAUTION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT SAFEGUARDS 1) Read Instructions - All the safety and operating instructions should be read before the product is operated. 2) Retain Instructions - The safety and operating instructions should be retained for future reference. [. . . ] By using the SKIP buttons H G During playback, press the SKIP G button to move to the next chapter. Press it repeatedly to skip to subsequent chapters. Press the SKIP H button to go back to the beginning of the current chapter. Press it repeatedly to go to the previous chapters. · Chapter number will appear briefly on the front panel display. · If the SKIP H or G button is pressed while the playback is paused, the playback after skipping to the next chapter will be also paused. · On DVDs, set "STILL MODE" to "FIELD" on the Display menu if pictures in the slow playback mode are blurred (refer to page 23). Step by Step Playback DVD 1 During playback, press the STILL/PAUSE button. · Playback will pause and sound will be muted. F NOTES: · Depending on the disc being played, the Numeric buttons can be used to search for a desired chapter by entering the chapter number directly. Refer to the manual accompanying the disc. · The SKIP H and G buttons are not available when playback is stopped. · A disc that does not contain chapters within titles, the SKIP H and G buttons change the titles. 2 The disc advances frame by frame each time the STILL/PAUSE button is pressed. 3 To exit step by step playback, press the PLAY button. NOTE: · On DVDs, set "STILL MODE" to "FIELD" on the display menu if pictures in the pause mode are blurred (refer to page 23). ­ 16 ­ EN DISC PLAYBACK Track Search 3 When the disc reaches the point you want to There are two ways to begin playback an Audio CD, MP3, JPEG or WMA disc at a specific track. 4 To return to the Marker later, press the SEARCH By using the SEARCH MODE button 1 Press the SEARCH MODE button. __/ 15 · The track search display appears. 2 Within 30 seconds, select a desired track number using the Numeric buttons. · For the disc with less than 10 tracks, press the track number directly. · For discs with 10 or more but less than 100 tracks, to play back a single-digit track, press 0 first, then the track number (e. g. To play back a double-digit track, press the track number. · For discs with 100 or more tracks, to play back a single- or a double-digit track, press 0 first, then the track number (e. g. for track 3, press 0, 0, 3, and for track 26, press 0, 2, 6). To play back a triple-digit track, press the track number. · Press the CLEAR button to erase the incorrect input. MODE button repeatedly during playback and the Cursor buttons (s or B) to choose a desired marker, then press the ENTER button. 5 Press the SEARCH MODE or RETURN button to exit. NOTES: · Opening the disc tray, turning off the power or selecting AC at step 2 and pressing the ENTER button will erase all Markers. · To clear a marker, using the Cursor buttons (s or B), position the cursor on to the marker number to be cleared and press the CLEAR button. · You can mark up to 10 points. Repeat · The REPEAT button is available only during playback. REPEAT TITLE / CHAPTER NOTE: · The +10 button can also bring up the track search display except for the disc with less than 10 tracks. [. . . ] 24 ­ Insert a correct disc that plays on this player. 6 No return to start-up screen when disc is removed ­ Reset the player by turning it off, then on again. ­­ The player does not respond to the remote ­ Aim the remote control directly at the sensor on the front 8 control of the player. ­ Reduce the distance to the player. [. . . ]