User manual DENON DVD-2930CI

[. . . ] DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-2930CI OPERATING INSTRUCTIONS ENGLISH ¢ SAFETY PRECAUTIONS SAFETY INSTRUCTIONS 1. Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. [. . . ] Sets the optimum progressive mode for the image material. 1 2 D 1 Use [D H] to select "PROGRESSIVE MODE", then press [ENTER]. D D 1 Use [D H] to select "SQUEEZE MODE", then press 2 Use [D H] to select the item to be set, then press [ENTER]. D 2 Use [D H] to select the item to be set, then press [ENTER]. OFF (Upon purchase): The picture is displayed over the entire 16:9 TV screen, regardless of the original image size. ON: The picture is displayed in the center of the 16:9 TV screen with a 4:3 aspect ratio, regardless of the original image size. AUTO: When playing 4:3 images, the picture is displayed in the center of the 16:9 TV screen with a 4:3 aspect ratio. VIDEO1: This mode is suited for playing video material discs. VIDEO2: This mode is suited for playing video material discs and 30-frame film material discs. AUTO (Upon purchase): The material type (film or video) is automatically identified from the disc and the mode is selected automatically. 21 ENGLISH ENGLISH Making the initial settings Making the initial settings 1 2 Audio settings ( ) ". · The procedure for making the "SPEAKER CONFIGURATION", "CHANNEL LEVEL" and "DELAY TIME" settings is the same as when "MULTI (LPCM)" is selected at "HDMI AUDIO SETUP" ( page 17). · When "ON" is selected for "SW+10dB" at "CHANNEL LEVEL", the volume of the sound output from the subwoofer can be set 10 dB higher. F Use [F G] to select " Audio channels Set the audio output. D 1 Use [D H] to select "AUDIO CHANNEL", then press [ENTER]. Horizontal display range Set the horizontal display range with respect to the interlaced output. ¢ About V. S. S. (Virtual Surround Sound) · Using the V. S. S. function lets you enjoy a surround effect with only 2 speakers (left and right). · This function is only effective for DVDs recorded in Dolby Digital, DTS, MPEG, LPCM with 2 or more channels. · For some discs the effect may be weak or there may be no effect at all. · For some discs the sound may be distorted when using this function. · Cancel other surround functions (for example, the TV's surround mode) when using this function. · The effect is stronger if the listening position is approximately 3 to 4 times the distance of the space between the front speakers (or the sideways width of the TV when using the TV's speakers). D 2 Use [D H] to select the item to be set, then press [ENTER]. MULTI CHANNEL (Upon purchase): Select this when using 3 or more speakers. The "SPEAKER CONFIGURATION", "CHANNEL LEVEL" and "DELAY TIME" setting screens appear. 2CH (VSS OFF): Select this when using 2 speakers and a Dolby Pro Logic decoder (Dolby Pro Logic compatible amplifier). 2CH (VSS1 ON): This setting provides a natural surround effect in a system with 2 speakers connected. 2CH (VSS2 ON): This settings provides a stronger surround effect in a system with 2 speakers connected than VSS1. D 1 Use [D H] to select "PIXEL CROPPING", then press [ENTER]. 2 [ENTER]. D Use [D H] to select the item to be set, then press OFF (Upon purchase): Select this when a regular consumer TV is connected. ON: When a professional monitor is connected, select this if the image's synchronization is disturbed. 1 2 1 2 22 ENGLISH ENGLISH Making the initial settings Making the initial settings Digital output Use this procedure to set the signal format of the digital audio output. Downsampling Use this procedure to set the digital audio output when playing DVDs recorded in linear PCM or packed PCM. Source direct Use this procedure to making the setting for direct audio output of the disc's data without making the "SPEAKER SETUP" settings at "AUDIO CHANNEL". Making this setting allows you to enjoy full-band playback of all channels, as recommended for DTS. (Note that this setting increases the volume of the subwoofer by 5 dB, or 15 dB for Super Audio CDs. ) This setting also lets you enjoy playback of 6-channel DVD-Audio sources recorded in full frequency band for all channels. D 1 Use [D H] to select "DIGITAL OUTPUT", then press 1 Use [D H] to select "DOWN SAMPLING", then D [ENTER]. D 2 Use [D H] to select the item to be set, then press 2 Use [D H] to select the item to be set, then press D [ENTER]. NORMAL (Upon purchase): Select this when an AV amplifier with built-in Dolby Digital or DTS decoder is connected to the DVD-2930CI's digital audio output terminal. [. . . ] · When HDMI connections are made with a device not compatible with HDMI Ver. 1. 1, the audio signals of DVD-Audio discs that are copyright protected with CPPM are not output. · · · · Page 12 3, 4 3 4 9 ~ 12 28 -- 9 ~ 12 -- 23 10, 11 28 · Use the following procedure to reset all the initial setting values to the values set upon purchase. Use the following procedure to reset all the initial setting values to the values set upon purchase. [. . . ]