User manual DENON DVD-955

[. . . ] DVD AUDIO-VIDEO/SUPER AUDIO CD PLAYER DVD-2910/955 OPERATING INSTRUCTIONS POWER OFF POWER ON HDMI/DVI SELECT FORMAT NTSC/PAL OPEN/ CLOSE SUPER AUDIO CD SETUP PROGRAM /DIRECT CLEAR SEARCH MODE CALL ANGLE SUBTITLE AUDIO TOP MENU DISPLAY MENU RETURN STOP STILL/PAUSE PLAY SKIP SLOW/SEARCH REPEAT OPEN/CLOSE PLAY STOP A-B PAGE RANDOM MARKER PICTURE ADJUST ZOOM DIMMER SETUP PURE DIRECT SELECT MEMORY ON / STANDBY STILL / PAUSE SUPER AUDIO CD SETUP PURE DIRECT SELECT HDMI / DVI FORMAT SELECT DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-2910 RC-985 FOR ENGLISH READERS PAGE 006 ~ PAGE 075 IMPORTANT TO SAFETY WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. NOTE: This DVD audio-video/Super audio CD player uses the semiconductor laser. To allow you to enjoy music at a stable operation, it is recommended to use this in a room of 5 °C (41 °F) ~ 35 °C (95 °F). CAUTION: CAUTION: 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. [. . . ] DELAY TIME Use this to set the distance from the different speakers to the listening position. To exit the SPEAKER SETUP mode Use the ª cursor button to select "AUDIO SETUP" then press ENTER button. The SPEAKER CONFIGURATION settings only apply to analog outputs. B When "SPEAKER CONFIGURATION" is selected, use the · and ª cursor buttons to select the speaker to be set then press the ENTER button. · The type of speaker used for the front speakers, center speaker, subwoofer and surround speakers can be set. Use the · and ª cursor buttons to select the speaker type, then press the ENTER button. LARGE Select this when a large speaker is connected. SMALL Select this when a small speaker is connected. NONE Select this when no speaker is connected. YES Select this when a subwoofer is connected. NO Select this when no subwoofer is connected. Press the RETURN button to return to the "SPEAKER SETUP" menu. B When "CHANNEL LEVEL" is selected, use the · and ª cursor buttons to select the speaker to be adjusted, then use the 0 and 1 cursor buttons to set the level. TEST TONE · Use the 0 and 1 cursor buttons to select auto or manual. Adjust so that the volume of the test tones output from the different speakers sounds the same. · The volume level output from the front speakers (left and right channels), center speaker, surround speakers (left and right channels) and subwoofer can be adjusted. · The volume level can be adjusted between 0 and -10 dB in steps of 1 dB. · Settings SW + 10 dB to "ON" increases by 10 dB the volume level that is output from the subwoofer. Press the RETURN button to return to the "SPEAKER SETUP" menu. Remote control unit Remote control unit SPE AKE R SE TUP SPE AKER CONF I GURAT I ON CHANNE L L E VE L DE L AY T I ME AUD I O SE TUP SE L EC T : DE C I S I ON : ENTER BUT TON SPE AKE R SE TUP SPE AK ER CONF I GURAT I ON F RONT SP CENT ER SP SUBWOOF ER SURROUND SP L ARGE L ARGE YES L ARGE 3 SE L EC T : DE C I S I ON : ENTER BUT TON Remote control unit SPE AKE R SE TUP CHANNEL LEVEL T E ST TONE F RONT L CH CENT ER F RONT RCH SURROUND RCH SURROUND L CH SUBWOOF ER SW + 1 0 dB SE L EC T : OF F 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB OFF DEC I S I ON : ENTER BUT TON 35 ENGLISH B When "DELAY TIME" is selected: With 5. 1-channel surround sound, ideally the distance between the listening position and all the speakers aside from the subwoofer should be the same. The delay time setting can be used to make the sound from the different speakers reach the listening position at the same time. Use the · and ª cursor buttons to select the setting item, then press the ENTER button. · When "DISTANCE" is selected: METERS (when the 0 cursor button is pressed): The unit of distance is set to meters ("m"). [. . . ] · While the player is in the stop mode, hold the player's SKIP 9 button and the PLAY button down simultaneously and then hold the OPEN/CLOSE button down for longer than 3 seconds (until "INITIALIZE" disappears from the TV monitor). The lock will be released and all default settings and picture settings will return to the default values. · The disc does not play with the selected audio or subtitle language if that audio or subtitle language is not included on that DVD. · Set the "TV ASPECT" default setting to the proper setting for the connected TV. [. . . ]