User manual DENON DVD-DWRC DATASHEET

[. . . ] Designer Systems Bespoke Electronic Design & Manufacturing in the UK Wired ® Controller for the Denon V300 player Technical Data DVD-DWRC(+) controller Firmware revision 1. 00 Features · Designed for Point-of-Sale, training / educational, museums and presentation applications Ultra low power consumption Simple connection to Denon® V300 player serial port Assign 32 sets of functions to the seven buttons with internal DIP switch Plug and Play Water resistant polycarbonate membrane with under surface tactile buttons (buttons and membrane replaceable) Upgradeable with Passive Infrared sensor to allow pedestrian activation of presentation Description The DVD-DWRC unit permits the control of DVD, CD Audio or VCD media on a Denon® V300 player. Designed for Point-of-Sale, training / educational, museums and presentation applications the unit provides simple control of the media with seven (7) configurable buttons. These buttons may be configured with an internal switch to one of thirty two (32) button sets to fit the desired application and provide authoring flexibility. [. . . ] All I/O is RS232 and TTL compatible. DVD control protocol The DVD-DWRC communicates with each player using the player control protocol. This protocol takes the form of ASCII command strings of format: Table 1. 0 (Custom button settings) Dipswitch 0=OFF 1=ON 5 Standard Option 2 Option 3 Option 4 Option 5 Option 6 Option 7 Option 8 Option 9 Option 10 Option 11 Option 12 Option 13 Option 14 Option 15 Option 16 Option 17 Option 18 Option 19 Option 20 Option 21 Option 22 Option 23 Option 24 Option 25 Option 26 Option 27 Option 28 Option 29 Option 30 Option 31 Option 32 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 3 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 2 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 Left Left Left Left Left Left Left Left Left Left Left Left Left Left Left 2 Skip1 2 1 2 1 4 Left 2 SearchSearchSkipSearchSkip1 SkipUp Up Up Up Up Up Up Up Up Up Up Up Up Up Up 1 1 Skip+ 1 2 1 2 1 Up 2 Up Up Up 1 Angle 2 Up Right Right Right Right Right Right Right Right Right Right Right Right Right Right Right 4 Skip+ 3 3 4 3 3 2 Right 4 Search+ Search+ Skip+ Search+ Skip+ 4 Skip+ Down Down Down Down Down Down Down Down Down Down Down Down Down Down Down 5 3 Skip4 3 4 4 3 Down 5 Down Down Down 3 Down 3 Down Go Go Go Go Go Go Go Go Go Go Go Go Play Play Play 3 2 2 No op. Play Play Go Go Go 3 Go Pause Pause 2 Go Pause Go Menu Menu Menu Audio Menu SkipSearchMenu Down Audio Subtitle Angle No op. Menu SkipMenu Menu Menu Menu Menu Menu Menu Menu Menu SkipMenu Menu Menu Menu Menu Menu Menu Play Audio Subtitle Subtitle Return Skip+ Search+ Pause Go Angle Angle Pause No op. Angle Skip+ Play Play Play Play Pause Pause Pause Pause No op. Skip+ Pause Go Go Pause Pause Return Return Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Play Button 1 Button 2 Button 3 Button 4 Button 5 Button 6 Button 7 PIR (optional) Distributed by : Kingsbridge House, Padbury Oaks 575-583 Bath Road, Longford Middlesex UB7 0EH United Kingdom Page 2 of 4 V1. 00 Tel: +44 1753 680023 Fax: +44 1753 686020 Email: sales@dm-pro. eu Installation 1. The controller may be hand-held or surface mounted to a panel. Four M3 x 20mm stainless steel screws are supplied to replace the screws in the base of the DVD-DWRC when mounting to a panel of 1 to 5mm thick. If button function other than the standard UP, DOWN, LEFT, RIGHT, GO, MENU & PLAY is required then remove the four (4) screws in the base of the controller, lift off the top cover and set the DIP switch (SW8 Option Select) to the option setting in Table 1. 0 on the previous page. Ensuring that power to the Denon V300 player is switched OFF insert the lead from the controller into the serial connector on the rear of the Denon V300 player and secure with the integral screw-locks. Switch ON the Denon V300 player and test by pressing each of the buttons. PIR installation (Not required on the DVD-DWRC+) 1. The DVD-DWRC controller may be optionally fitted with a Passive Infrared (PIR) motion sensor to allow the DVD presentation to be controlled when a passer-by (pedestrian) is detected. To install the sensor remove the four (4) screws in the base of the controller, lift off the top cover, locate the three (3) way socket marked `SN1' and without touching the pins of the sensor, which could cause static damage, insert it into the socket. With a sharp modelling knife remove the label covering the 10mm hole that mates with the sensor (TIP: Make a cross-cut in the label from the inside of the top cover and then from the front remove the label material by following the hole around using the knife tip in a punching motion). [. . . ] The applications mentioned herein are used solely for the purpose of illustration and Designer Systems makes no warranty or representation that such applications will be suitable without further modification, nor recommends the use of its products for application that may present a risk to human life due to malfunction or otherwise. Designer Systems reserves the right to alter its products without prior notification. For the most up-to-date information, please visit our web site at http://www. designersystems. co. uk Distributed by : Kingsbridge House, Padbury Oaks 575-583 Bath Road, Longford Middlesex UB7 0EH United Kingdom Page 4 of 4 V1. 00 Tel: +44 1753 680023 Fax: +44 1753 686020 Email: sales@dm-pro. eu 26. 0 26. 0 D3. 5mm x4 74 (2. 9) 2000 (79) [. . . ]