User manual DENON MCS 160

[. . . ] The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. [. . . ] Use the speaker wire included with the system to make your connections. For longer distances, #16 or #18 gauge wire available from your dealer should be used. Please see the illustration for guidance connecting the wires to the MCS 160 satellites and center channel. For connection to your receiver please refer to its owner’s manual. To ensure the best performance observe polarities when making speaker connections, as shown in the illustration. Connect each + terminal on the back of the amplifier or receiver to the respective + (red) terminal on each speaker. Connect the – (black) terminals in the same way. If the connections are not made correctly it can cause poor bass response and imaging. Also, to avoid short circuits that may damage your equipment, be careful not to let any of the bare wires touch each other. + – + Red – Black Subwoofer Connections Turn off all power. Use the subwoofer cable included with your system to connect the subwoofer to your receivers Subwoofer or LFE Output. Connect the other end to the “Line In” on the back of the Subwoofer. MCS 160 4 Subwoofer Controls Power On/Off Plug the subwoofer’s AC cord into a wall outlet. Do not use the outlets on the back of the receiver. Set the power switch to the desired setting. OFF – The subwoofer is off and will not produce any sound. You may want to turn your subwoofer off if you will not be using it for some time or wish to conserve electricity. If no signal is detected after several minutes, it will automatically enter the Mute mode. MCS 160 LED indicator An LED indicator between the Power switch and the Polarity switch indicates what mode the subwoofer is in. OFF – The subwoofer is off RED – MUTE (No signal detected, Audio Off ) GREEN – ON (Signal detected, Amp On) The subwoofer will automatically enter the Mute mode after several minutes when no signal is detected from your system. The subwoofer will then power ON instantly when a signal is detected. Volume Control Begin by adjusting the Subwoofer Volume Control to the 11 o’clock position. [. . . ] After it has been repaired, we will return it freight prepaid in the United States and Canada. For EU Customers Only This symbol found on the product indicates that the product must not be disposed of with household waste. Instead, it may be placed in a separate collection facility for electronic waste or returned to a retailer when purchasing similar product. The producer paid to recycle this product. [. . . ]