User manual DENON RCD-M39

[. . . ] · Do not let foreign objects in the set. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. · Handle the power cord carefully. · Unplug the power cord when not using the set for long periods of time. · Do not let insecticides, benzene, and thinner come in contact with the set. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CLASS 1 LASER PRODUCT CLASS 1 , , LASER PRODUCT * (For sets with ventilation holes) · DECLARATION OF CONFORMITY We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN610003-2 and EN61000-3-3. [. . . ] (Press the 2/BAND and + buttons at the same time to change the Preset mode. ) 3 Main unit Remote control unit Remote control unit Next Flashes Using the RDS functions (This operation is only possible from the remote control unit. ) 4 Receiving RDS broadcasts (FM only) 5 Press the 9 /8 button on the remote control unit to tune in the desired preset number. 1 Press the BAND button and set the FM AUTO. Main unit Remote control unit 6 Press the ENTER/ MEMO button to confirm the preset station number. 2 Press the RDS button. · To change a preset station name, press the CH+(9)/ CH­(8) to display the preset station you want to change, then press EDIT and use the same procedure as in step 3 above to change. · To preset only the frequency of the radio station, start over from step 1. Then press the ENTER/ MEMO button and proceed to steps 5 through 6. The display shows the preset number, band and frequency. 3 Press the TU+(7 ) or TU­(6) button. (auto tuning) Reception frequency 4 The station is tuned in. NOTE: If no RDS station is found, " NO PROGRAM " is displayed. 13 PTY Search TP Search 1 Press the RDS button twice. 1 Press the RDS button 3 times. 2 Press the PTY button to select the type of program. (One of the 29 types listed below can be selected. ) 2 Press the TU+(7 ) or TU­(6) button. (auto tuning) Reception frequency 3 Press the TU+(7 ) or TU­(6) button. (auto tuning) Reception frequency 3 The station is tuned in. NOTE: " NO PROGRAM " is displayed when there is no traffic information broadcast station. 4 The station is tuned in. Radio Text NOTE: If no program of the specified type is found, " NO PROGRAM " is displayed. Program Types To set the RT mode, press the TIME/ DISPLAY button on the remote control unit until "Radio Text" scrolls on the display. 1 (News) (Affairs) (Information) (Sports) (Education) (Drama) (Culture) (Science) (Varied) (Pop Music) (Rock Music) (Easy Listening) (Light Classical) (Serious Classical) (Other Music) (Weather & Meteorological) (Finance) (Children`s Programs) (Social Affairs) (Religion) (Phone In) (Travel & Touring) (Leisure & Hobby) (Jazz Music) (Country Music) (National Music) (Oldies Music) (Folk Music) (Documentary) 2 When the station currently tuned in is offering a radio text message service, the message scrolls on the display. Scrolling display · When the RT mode is turned on while an RDS radio station not offering an RT service is tuned in, "NO TEXT" is displayed on the display, then the mode automatically switches to the PS mode. · In the same way, the mode automatically switches to the PS mode when the RT service is finished. wStation Name The service station name is displayed. eProgram Type The category of the currently tuned in station is displayed. rEnsemble Name 1 wStation Order Use 9/8 buttons to change the order of the entries on the service list created using the "AUTO SCAN" function. If the mark is to the right of the borderline, there is little noise in the sound being received. 2 The ensemble name is displayed. ySignal Quality The sensitivity of the reception signal (0 to 100) is displayed. A value of 80 or higher indicates reception with no noise. uAudio Information The bite rate and mode of the currently tuned in station is displayed. iData and Time The current date and time are displayed. · The timer clock can be set using the MENU/SET button. <MULTIPLEX> By order of frequency (Default) <ALPHANUMERIC> In alphabetical order eDynamic Range Control Use 9/8 buttons to switch the dynamic range. <OFF> <1> rDAB Version <1/2> The DAB module's version is displayed. 16 11 USING THE TIMER The time and timer functions are incorporated in the CD receiver. Timer Settings Types of timer operations EVERYDAY TIMER : Use this to turn the power on and standby at the same time every day. ONCE TIMER : Use this to turn the power on and standby once. SLEEP TIMER : Use this to set the power to turn standby after 10 to 90 minutes, in steps of 10 minutes (operated from the remote control unit). [. . . ] 10%) TAPE input/output jacks, AUX input/output jacks, MONO OUT 3. 5 mm headphones jack Below measurable limits (±0. 001% W. peak) 44. 1 kHz Semiconductor OUTPUT level : 1. 2 Vrms (TAPE OUT, AUX OUT) Power source synchronous system ± 30 seconds Everyday timer (1 setting) Once timer (1 setting) Sleep timer (maximum 90 min. ) Cause Remedy page 5 Power does not turn on · Power cord is not plugged into a · Plug the power cord securely into an outlet. · Speaker cords are not securely connected. · Speaker polarities ( < and >) are inverted. [. . . ]