User manual DEWALT D21805K

[. . . ] Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users. & Ireland only) Power input No-load speed 1st gear 2nd gear No load impact 1st gear 2nd gear Maximum drilling range in steel/wood/concrete Chuck spindle thread size Collar diameter Maximum chuck capacity Weight Level of sound pressure according to EN 60745: Sound pressure (LpA) Uncertainty (KpA) Acoustic power (LWA) Uncertainty (KWA) dB(A) dB(A) dB(A) dB(A) 95 3. Vibration total values (triax vector sum) determined according to EN 60745: Drilling into Metal ahD = Uncertainty K = Vibration emission value a h Impact Drill ahID = Uncertainty K = Fuses: Europe U. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. [. . . ] 4 Power tool use and care a Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. B Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. C Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. D Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g Use the power tool , accessories and tool bits etc. , in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5 Service a Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Additional safety instructions for impact drills Wear ear protectors with impact drills. Exposure to noise can cause hearing loss. Use auxiliary handles supplied with the tool. loss of control can cause personal injury. [. . . ] A) To select forward or reverse rotation, use the forward/reverse-switch (3) (see arrow on tool). WARNING: Always wait until the motor has come to a complete standstill before changing the direction of rotation. D) Your tool is fitted with a two gear selector (4) to vary the speed/torque ratio. Release the variable speed switch and select the required position. [. . . ]