User manual DEWALT DC728KA

[. . . ] Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users. Torque Chuck capacity Maximum drilling capacity in steel/wood Weight (without battery pack) NiCd battery pack Voltage Capacity Weight NiCd battery pack Voltage Capacity Weight NiMH battery pack Voltage Capacity Weight DE9074 12 1. The following symbols are used throughout this manual: Denotes risk of personal injury, loss of life or damage to the tool in case of nonobservance of the instructions in this manual. For more information, please contact DEWALT at the address below, or refer to the back of the manual. [. . . ] Use of any other battery packs may create a risk of injury and fire. D When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. shorting the battery terminals together may cause burns or a fire. E Under abusive conditions, liquid may be ejected from the battery; avoid contact. if contact accidentally occurs , flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. 6 Service a Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Do not store or carry the battery pack without the battery cap placed over the contacts. In case of skin contact, flush immediately with water. neutralize with a mild acid such as lemon juice or vinegar. In case of eye contact, rinse abundantly with clean water for at least 10 minutes. Never attempt to open a battery pack for any reason. Labels on charger and battery pack In addition to the pictographs used in this manual, the labels on the charger and the battery pack show the following pictographs: Check for damage to the tool, parts or accessories which may have occurred during transport. Take the time to thoroughly read and understand this manual prior to operation. 1 Variable speed switch 2 Forward/reverse slider 3 Two gear selector 4 Mode selector/torque adjustment collar 5 Collar settings 6 Keyless chuck 7 Bit holder 8 Grip 9 Battery pack Charger Your DE9107 charger accepts DEWALT NiCd battery packs ranging from 7. Your DE9118 charger accepts DEWALT NiCd battery packs ranging from 7. Your DE9116 charger accepts DEWALT NiCd and NiMH battery packs ranging from 7. 9 Battery pack 10 Release buttons 11 Charger 12 Charging indicator (red) Auto-spindle lock The auto-spindle lock is engaged when the transmission is stationary. The chuck sleeve can easily be turned with one hand while the other supports the unit. Do not probe with conductive objects Read instruction manual before use Use only with DEWALT battery packs, others may burst, causing personal injury and damage Do not expose to water Have defective cords replaced immediately Discard the battery pack with due care for the environment Do not incinerate the battery pack Always check that the battery pack voltage corresponds to the voltage on the rating plate. [. . . ] DE9116 - Hot Pack Delay When the charger detects a battery that is hot, it automatically starts a Hot Pack Delay, suspending charging until the battery has cooled. After the battery has cooled, the charger automatically switches to the pack charging mode. this feature ensures maximum battery life. The red indicator (12) blinks long, then short while in the Hot Pack Delay mode. [. . . ]