User manual DEWALT DC740K2

[. . . ] Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users. maintained , the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. [. . . ] This does not apply to the vehicular charger. The automatic refresh mode will equalise or balance the individual cells in the battery pack at its peak capacity. Battery packs should be refreshed weekly or whenever the pack no longer delivers the same amount of work. To refresh your battery pack, place the battery in the charger as usual. Leave the battery pack for at least 8 hours in the charger. When the charger detects a battery that is too hot or too cold, it automatically starts a Hot/Cold Pack Delay, suspending charging until the battery has reached an appropriate temperature. The charger then automatically switches to the pack charging mode. this feature ensures maximum battery life. DEEP DISCHARGE PROTECTION The battery pack is protected against deep discharging when it is used in the tool. Your DE9116 charger accepts DEWALT NiCd and NiMH battery packs ranging from 7. Your DE9118 charger accepts DEWALT NiCd battery packs ranging from 7. These chargers require no adjustment and are designed to be as easy as possible to operate. When ordering replacement battery packs, be sure to include catalog number and voltage. consult the chart at the end of this manual for compatibility of chargers and battery packs. The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the safety instructions below. Plug the charger (k) into an appropriate outlet before inserting battery pack. The pack is fully charged and may be used at this time or left in the charger. the battery pack can explode in a fire. Toxic fumes and materials are created when lithium ion battery packs are burned. If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. [. . . ] WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT, recommended accessories should be used with this product. Consult your dealer for further information on the appropriate accessories. Your DEWALT power tool has been designed to operate over a long period of time with a minimum of maintenance. [. . . ]