User manual DEWALT DC920KB

[. . . ] Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users. The following symbols are used throughout this manual: Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instructions in this manual. For more information, please contact DEWALT at the address below, or refer to the back of the manual. KpA (sound pressure uncertainty) KWA (acoustic power uncertainty) 1 Work area safety a Keep work area clean and well lit. [. . . ] Liquid ejected from the battery may cause irritation or burns. 6 Service a Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Additional safety instructions for impact drills Wear ear protectors with impact drills. Exposure to noise can cause hearing loss. Use auxiliary handles supplied with the tool. loss of control can cause personal injury. Additional safety instructions for battery packs and chargers Make sure that the battery pack is dry and clean before inserting it into the charger. use only chargers labelled "NiMH" or "NiMH + NiCd" to charge DEWALT NiMH battery packs. Never pull the cord to disconnect from the socket. Keep the cord away from heat, oil and sharp edges. Never attempt to open a battery pack for any reason. Always follow the instructions in the back of this manual for battery pack disposal. When not in use, chargers and battery packs must be stored in a dry place and locked up securely, out of reach of children. Labels on charger and battery pack In addition to the pictographs used in this manual, the labels on the charger and the battery pack show the following pictographs: Do not probe with conductive objects Read instruction manual before use Use only with DEWALT battery packs, others may burst, causing personal injury and damage Do not expose to water Have defective cords replaced immediately Discard the battery pack with due care for the environment Auto-spindle lock The auto-spindle lock is engaged when the transmission is stationary. The chuck sleeve can easily be turned with one hand while the other supports the unit. Do not incinerate the battery pack The package contains: 1 Cordless midhandle driver/drill 1 Side handle 1 Charger 2 Battery packs (KB models) 1 Kitbox 1 Instruction manual 1 Exploded drawing Note: Battery packs and chargers are not included with N-models. Check for damage to the tool, parts or accessories which may have occurred during transport. Take the time to thoroughly read and understand this manual prior to operation. Always check that the battery pack voltage corresponds to the voltage on the rating plate. Also make sure that the voltage of your charger corresponds to that of your mains. Your DEWALT charger is double insulated in accordance with EN 60745 & EN 60335. [. . . ] The red indicator (13) blinks long, then short while in the Hot/Cold Pack Delay mode. D) The collar of this tool has a wide range of positions for the adjustment of the torque to suit the size of the screw and the workpiece material. for torque adjustment , refer to the section "Screwdriving". To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf. [. . . ]