User manual DEWALT DW621

[. . . ] Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. â· Keep bystanders, children, and visitors away while operating a power tool. [. . . ] Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. â· Keep handles dry, clean, free from oil and grease. it is recommended to use rubber gloves. This will enable better control of the tool. â· The label on your tool may include the following symbols. â· The label on your tool may include the following symbols. TURN OFF AND UNPLUG ROUTER NOTE: Always snap the collet firmly into the collet nut, (past the retainer spring) before installing a bit. Use the supplied wrench and the spindle lock as necessary to loosen (counterclockwise) the collet nut, (Fig. Insert the round shank of the desired router bit into the loosened collet as far as it will go and then pull it out about 1/16". Hold the spindle shaft by depressing the spindle lock button, while firmly tightening the collet nut with the wrench provided. your router has a unique locking system for retaining the bit. When removing a bit, the collet nut must be loosened with the wrench. Collet nut will turn approximately 3/4 of a turn and then become tight again. At this point the bit can't be removed. Using the same procedure, loosen the nut a second time. This lifts the collet and makes it easy to remove the bit. NOTE: Your router is equipped with a clear plastic cap over the cutting area. When installing a router bit over 1-1/8" in diameter, ensure the plastic cap is removed or positioned above the cutting portion of the bit (Fig. To remove the cap, push it from the bottom of the router. Do not attempt to remove the collet from the collet nut. ELECTRONIC SPEED CONTROL DIAL The speed of your router is variable. [. . . ] To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts DEWALT heavy duty industrial tools are warranted for one year from date of purchase. We will repair, without charge, any defects due to faulty materials or workmanship. arrangements have been made with the Industrial Tool Division of Black & Decker to provide warranty repairs for DEWALT tools. Please return the complete unit, transportation prepaid, to any Black & Decker Industrial Service Center or Authorized Service Station listed under "Tools, Electric" in the yellow pages. [. . . ]