User manual DIGITECH C7

[. . . ] DigiTech 8760 South Sandy Parkway Sandy, Utah 84070 USA Tel: (801) 566-8800 Fax: (801) 566-7005 CONTROL MIDI Controller Pedal International Distribution 3 Overlook Drive Unit 4 Amherst, New Hampshire 03031 USA Tel: (603) 672-4244 Fax: (603) 672-4246 Control Seven 18-2157-A Owner's Manual Introducing the Control Seven MIDI Controller Pedal The Control Seven MIDI Controller Pedal is a MIDI program change device, designed to provide a hands-free way to change programs on any MIDI device. The Control Seven transmits program changes 1-128 on MIDI channels 1-16. Pedal Description Program Selection The Control Seven operates in Banks of ten. [. . . ] The numbers will change slowly at first, then scroll rapidly. On power-up, the Control Seven defaults to MIDI Channel 1/Program Number 0. The Control Seven only transmits program change numbers 1 through 128, numbers 0 and 129 will not be transmitted. The warranty registration card must be mailed within ten days after purchase date to validate this warranty. DigiTech warrants this product, when used solely within the U. S. , to be free form defects in materials and workmanship under normal use and service. DigiTech liability under this warranty is limited to repairing or replacing defective materials that show evidence of defect, provided the product is returned through the original dealer, where all parts and labor will be covered up to a period of one year. The company shall not be liable for any consequential damage as a result of the product's use in any circuit or assembly. Proof-of-purchase is considered to be the burden of the customer. DigiTech reserves the right to make changes in design, make additions to, or improvements upon this product without incurring any obligation to install the same on PRODUCTS PREVIOUSLY MANUFACTURED. The foregoing is in lieu of all other warranties, expressed or implied, and DigiTech neither assumes nor authorizes any person to assume for it any obligation or liability in connection with the sale of this product. In no event shall DigiTech or its dealers be liable for special or consequential damages or form any delay in the performance of this warranty due to causes beyond their control. DigiTech is a registered trademark of DOD Electronics Corporation. CONTROL MIDI PROGRAM NUMBER 5-9 0-4 C = MIDI CHANNEL 5 06 39 1 U P 7 28 4 D O W N The Program Number/MIDI Channel display is a 4-digit LED display. [. . . ] Press any numbered pedal until the display increments th C 4 , then press either the UP or DOWN pedal. The Control Seven will now transmit on MIDI channel 4. [. . . ]