User manual DIGITECH GNX3000

[. . . ] Warranty We at DigiTech are very proud of our products and back-up each one we sell with the following warranty: 1. The warranty registration card must be mailed within ten days after purchase date to validate this warranty. DigiTech warrants this product, when used solely within the U. S. , to be free from defects in materials and workmanship under normal use and service. DigiTech liability under this warranty is limited to repairing or replacing defective materials that show evidence of defect, provided the product is returned to DigiTech WITH RETURN AUTHORIZATION, where all parts and labor will be covered up to a period of one year. [. . . ] Choices include: Triangle, Sine, and Square. Knob 5 No function when the Tremolo is selected. GNX3000 Owner's Manual 66 GNX3000 Owner's Manual Panner An Auto Panner modulates the sound from left to right at an even rate. Parameter 1 KNOB 2 adjusts the rate (Speed) at which the signal pans from side to side. Ranges from 0 to 99. Parameter 2 KNOB 3 adjusts the intensity (Depth) of the changing pan. Ranges from 0 to 99. Parameter 3 KNOB 4 selects the type of wave form the modulation uses. Choices include: Triangle, Sine, and Square. Knob 5 No function when the Panner is selected. Vibrato A Vibrato effect modulates the pitch of the incoming signal at an even rate. Parameter 1 KNOB 2 adjusts the rate (Speed) at which the pitch modulates. Ranges from 0 to 99. Parameter 2 KNOB 3 adjusts the intensity (Depth) of the modulating pitch. Ranges from 0 to 99. Parameter 3 KNOB 4 selects the type of wave form the modulation uses. Choices include: Triangle, Sine, and Square. Knob 5 KNOB 5 does not function when the Vibrato is selected. 67 GNX3000 Owner's Manual Effects and Parameters Rotary Speaker Rotary Speaker is an emulation of a device that includes a spinning horn and rotor (woofer). The rotation of these two speakers produces an interesting combination of sound panning from side to side, as well as a slight pitch change due to the speed of the sound coming towards, and then going away from the listener. Parameter 1 KNOB 2 adjusts the rate (Speed) of the spinning speakers. Ranges from 0 to 99. Parameter 2 KNOB 3 controls the intensity (Depth) of the Effect. Ranges from 0 to 99. Parameter 3 KNOB 4 controls the Pitch Shift (doppler) effect that is the ratio between the horn and the rotor positions. Ranges from 0 to 99. *Parameter 4 Selects the crossover frequency between the horn and rotor. Ranges from 200Hz to 1500Hz. Mod Mix KNOB 5 controls the mix (mod mix) of wet and dry signal. Ranges from 0 (all dry) to 99 (all wet). *This Parameter is only available using the X-EditTM Editor/Librarian software. GNX3000 Owner's Manual 68 GNX3000 Owner's Manual AutoYaTM An AutoYa combines the characteristics of a Wah and a Flanger together creating an almost human vowel sound as if the guitar were saying "Yah. " The AutoYa automatically provides this animation by modulating the sound at an even rate. Parameter 1 KNOB 2 adjusts the rate (Speed) of the AutoYa. Ranges from 0 to 99. Parameter 2 KNOB 3 adjusts the intensity (Depth) of the AutoYa effect. Ranges from 0 to 99. Parameter 3 KNOB 4 adjusts the throaty quality (Range) of the AutoYa effect. Ranges from 1 to 50. *Parameter 4 Adjusts the left to right balance of the wet signal, Ranges from mod left 99 to mod rght 99. Mod Mix KNOB 5 controls the mix (mod mix) of wet and dry signal. Ranges from 0 (all dry) to 99 (all wet). *This Parameter is only available using the X-EditTM Editor/Librarian software. 69 GNX3000 Owner's Manual Effects and Parameters YaYaTM The YaYa is an effect exclusive to DigiTech® products. The YaYa is controlled by the EXPRESSION PEDAL and combines the characteristics of a wah and a flanger together providing a unique talk box type of effect. As the EXPRESSION PEDAL is rocked back and forth, the guitar appears to say "Yah. " The YaYa effect must be linked to the EXPRESSION PEDAL in order to function. See page 75 for more information on linking the EXPRESSION PEDAL. Parameter 1 KNOB 2 adjusts the Ya Pedal position (YA PeDaL). Ranges from 0 to 99. Parameter 2 KNOB 3 adjusts the intensity (Depth) of the YaYa effect. Ranges from 0 to 99. Parameter 3 KNOB 4 adjusts the throaty quality (Range) of the YaYa effect. [. . . ] When I launch X-Edit, it can't find the GNX3000. · Make sure your drivers are loaded correctly and that the USB cable is inserted securely. · See the section on USB Driver installation. · Input monitoring is probably active. [. . . ]