Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual DIGITECH JAMMAN STEREO. We hope that this DIGITECH JAMMAN STEREO user guide will be useful to you.
Lastmanuals help download the user guide DIGITECH JAMMAN STEREO.
Manual abstract: user guide DIGITECH JAMMAN STEREO
Detailed instructions for use are in the User's Guide.
[. . . ] Owner's Manual
Professional Audio Equipment
IMPORTANT SAFETY INFORMATION
WarnInG for your ProtectIon reaD tHe foLLoWInG:
KEEP THESE INSTRUCTIONS HEED ALL WARNINGS
the symbols shown above are internationally accepted symbols that warn of potential hazards with electrical products. the lightning flash with arrowpoint in an equilateral triangle means that there are dangerous voltages present within the unit. the exclamation point in an equilateral triangle indicates that it is necessary for the user to refer to the owner's manual. these symbols warn that there are no user serviceable parts inside the unit. [. . . ] The teMPo/stoP footswitch will now be flashing at the set tempo (see page 42). (Optional) Set the Time Signature to something other than 4/4, if desired (see page 40). Press the Rec/PLaY/oVeRDUb footswitch and begin playing or singing to start recording. If a tempo has been set, there will be a single measure count-in indicated by the teMPo footswitch before recording begins. The Rec/PLaY/oVeRDUb footswitch will then light solid red, the LOOP LED will light, and recording will start. If no tempo has been set, recording will begin instantly after the Rec/PLaY/oVeRDUb footswitch is pressed and you begin playing. When you are ready to set the loop point for your phrase, press the Rec/PLaY/oVeRDUb footswitch to set the loop point and have the phrase play back in a repeating loop. The Rec/PLaY/oVeRDUb footswitch and PLaY status LEDs will light solid green. Press the teMPo/stoP footswitch to stop the loop playback.
3. 4.
5.
6.
Once you are finished recording, the stoRe button will be lit indicating the phrase must be stored to memory to be recalled later.
24
Recording a Loop - Inst/Mic Input
1
3
4 5
2 6
25
Auto Record Mode
The JamMan® Stereo's Auto Record feature lets the JamMan automatically begin recording when you begin playing or when audio is detected at the JamMan Stereo's inputs. When enabled, Auto Record works globally on all empty loop memories; you cannot use Auto Record with an existing loop. When the Rec/PLaY/oVeRDUb footswitch is pressed, the JamMan Stereo is armed for recording but won't start recording until you start playing (the RecoRD status and Rec/PLaY/oVeRDUb footswitch LEDs flash red to show that the JamMan is armed). The JamMan monitors the input level and starts the recording when it detects an audio signal. If you've tapped in a tempo while Auto Record is enabled, the rhythm guide track will begin playing. Pressing the Rec/PLaY/oVeRDUb footswitch will arm the JamMan Stereo for recording. As soon as signal is detected, recording will begin immediately. Changing to an empty loop memory while aUto Rec is enabled will preserve the aUto Rec state (the aUto Rec button will turn off when a memory that has a loop already stored in it is selected). To turn off Auto Record, press the aUto Rec button until it turns off.
26
Auto Record Mode
Auto Record button
27
Recording a Loop Using Auto Record
The JamMan® Stereo has an Auto Record feature that automatically starts recording when signal is detected at any of the JamMan Stereo's inputs. NOTE: The maximum loop time the JamMan Stereo can record or play is 10 minutes. You can't auto-record on an existing loop; Auto Record is only available when an empty loop memory is selected. Here is how to use Auto Record when recording a loop. Select an empty memory location using the LooP seLect knob or LooP UP/LooP DoWN footswitches (the LooP and sINgLe LEDs will be off). [. . . ] You can press the eXIt button to abort the procedure. To initiate the card formatting procedure, press and hold the stoRe button for two seconds. The DIsPLaY will show Bu indicating the card is being formatted. Once completed, the DIsPLaY will read 1 and the card is now ready for recording.
55
Erase All Loops - Memory Card
The Erase Loops procedure only erases JamMan Stereo loop data from a memory card. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DIGITECH JAMMAN STEREO
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual DIGITECH JAMMAN STEREO will begin.