User manual DIGITECH PDS1700

[. . . ] Do not attempt to service the unit yourself. Refer all servicing to qualified personnel. Opening the chassis for any reason will void the manufacturer's warranty. If liquid is spilled on the unit, shut it off immediately and take it to a dealer for service. [. . . ] The Lead FX button light on the front panel indicates the status of the Lead Effects. Toggles the Reverb and Delay Effects of the current preset Off and On. The Reverb/Delay button light on the front panel indicates the status of the Reverb and Delay Effects. The Reverb and Delay Effects are active while the specified Footswitch is pressed and deactivated when released. The Reverb/Delay button light on the front panel indicates the status of the Reverb and Delay Effects. Toggles both the Harmony Voices and Lead Effects of the current preset Off and On. The Lead FX and Harmony buttons light on the front panel indicating the status of their parameters. The Harmony Voices and Lead Effects are active while the specified Footswitch is pressed and deactivated when released. The Lead FX and Harmony buttons light on the front panel indicating the status of their parameters. Table Continued Next Page Aux Out Stereo Preset Up Preset Down Tuner Tap Tempo Harmony Toggle Harmony Momentary Footswitch 1, Footswitch 2, Footswitch 3 Lead FX Toggle Lead FX Momentary Reverb/ Delay Toggle Reverb/ Delay Momentary Harmony/ Lead FX Toggle Harmony/ Lead FX Momentary VL. Pro. Owner's. Manual 22 The. Global. I/O. Setup. Menu Global I/O Setup Table (Continued) Harmony/ Reverb/ Delay Toggle Harmony/ Reverb/ Delay Momentary Lead FX/ Reverb/ Delay Toggle Lead FX/ Reverb/ Delay Momentary Harmony/ Lead FX/ Reverb/ Delay Toggle Harmony/ Lead FX/ Reverb/ Delay Momentary Low Toggles both the Harmony Voices and Reverb and Delay Effects of the current preset Off and On. The Harmony and Reverb/ Delay buttons light on the front panel indicating the status of their parameters. The Harmony Voices and Reverb and Delay Effects are active while the specified Footswitch is pressed and deactivated when released. Where n refers the MIDI PC program selected with the MIDI Program To Edit, This parameter allows you to redefine the MIDI Program to the desired Vocalist Live Pro preset in any of either the User or Factory Preset Banks. VL-Pro Preset At n Pitch Bend Range Defines the MIDI Pitch Bend Range for the Controllers in Semitones. If +/- 24 Semitones are defined, this gives you a bend range of 48 semitones equal to 4 octaves (2 negative octaves plus 2 positive octaves bend range). Range: +/- 0 to 24 Semitones Disabled Disables MIDI Split Zone functionality. When using any of the musIQTM MIDI, Chordal, MIDI Notes or 4 Channel Notes Harmony Modes, the Vocalist Live Pro will only respond to MIDI Keyboard Notes played above the specified Split Note. Notes played below the Split Note are ignored by the Vocalist Live Pro. When using any of the musIQ MIDI, Chordal, MIDI Notes or 4 Channel Notes Harmony Modes, the Vocalist Live Pro will only respond to MIDI Keyboard Notes played below the specified Split Note. Notes played above the Split Note are ignored by the Vocalist Live Pro. Active Above Split Note Split Zone Active Below Split Note Split Note Defines the MIDI Keyboard Split Note to work in conjunction with the selected Split Zone Mode. Note that the Split Note of C5 is Middle C. Range: C0 to G10 When using the MIDI Notes or 4 Channel Notes Harmony Modes, this parameter will transpose the Harmony Voices defined in the Harmony Mode to the specified octave shifts with respect to the MIDI Keyboard note played. Range: -4 Octaves to +4 Octaves Table Continued Next Page MIDI Notes Transpose 25 VL. Pro. Owner's. Manual The. MIDI/Expression. Pedal. Setup. Menu MIDI/Expression Pedal Setup Table (Continued) MIDI Tempo Turns the MIDI Tempo functionality Off or On. This allows MIDI control of the Delay Tempo using the MIDI Timing Clock, so that the delays can be in synch with the music currently being played. [. . . ] · Ensure the Harmony Mode ­ musIQ Guitar button is selected. · Be sure that have tuned your guitar (see page 14). The harmony voices are not tracking the MIDI keyboard properly. · Verify that the MIDI keyboard is connected to the MIDI In port. [. . . ]