User manual DIGITECH RP1000

[. . . ] Integrated Effects Switching System Owner's Manual 1 If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Private household in the 25 member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one). For Countries not mentioned above, please contact your local authorities for a correct method of disposal. [. . . ] Octave 2 - Knob 4 controls the volume of the signal 2 octaves below the input signal. Dry Level - Knob 6 controls the volume of the dry signal. Ranges from 0 to 99. Delay Delay is an effect that records a portion of the incoming signal, and then plays it back a short time later. The recording can repeat just once or several times. Delay - Knob 1 selects one of the 7 different Delay types. Values include: analog (DigiTech® Analog Delay), dm delay (Based on the Boss DM-2 Analog Delay), digital (DigiTech Digital Delay), modulate (DigiTech Modulated Delay), pingpong (DigiTech Pong Delay), tape (DigiTech Tape Delay), echoplex (Based on the MaestroTM EP-2 Echoplex® Tape Echo), reverse (DigiTech Reverse Delay), lo fi (a Lo Fidelity Delay), and 2 tap (a 2-tap Delay). Press this knob to turn the Delays on and off. Knobs 2-6 have the following functions for the various Delay Effects: Delay Knob 2 (Time) Time Repeat Rate Time Time Time Time Time Time Time Time Knob 3 (Repeats) Repeats Echo Repeats Repeats Repeats Repeats Repeats Repeats Repeats Repeats Knob 4 (Param. 1) -Intensity Ducker Threshold Depth Ducker Threshold Wow ---Tap Ratio Knob 5 (Param. 2) Multiplier Multiplier Multiplier Multiplier Multiplier Multiplier Multiplier Multiplier Multiplier Multiplier Knob 6 (Delay Level) Delay Level -Delay Level Delay Level Delay Level Delay Level Volume Delay Mix Volume Delay Mix analog dm delay digital modulate pingpong tape echoplex reverse LO FI 2 tap The Repeats parameter (Knob 3) ranges from 0 to Repeat Hold (Hold) for all delays except the Echoplex®, DM-2, and Lo-Fi. Repeat Hold is one click past 99, and acts as an infinite repeat. The Multiplier parameter (Knob 5) lets you divide the tap tempo rate into 1/2, 1/4, dotted 1/8, 1/8, and triplet 1/4 note rhythms. 29 Using reverb in recorded program material gives the listener a sense that the material is being performed in an actual room or hall. It is this similarity to actual acoustic spaces that makes reverberation a useful tool in recorded music. The RP1000 features genuine Lexicon® reverbs, whose rich, lush effects have been heard in countless songs, soundtracks, and live performances for decades. Reverb Types Knob 1 selects the Reverb Effect or acoustic space. Press this knob to turn the Reverb on and off. The following types are available: twnsprng - Based on a Fender® Twin Reverb lexambnc - Lexicon® Ambience lexstudo - Lexicon Studio lex room - Lexicon Room lex hall - Lexicon Hall emtplate - Based on an EMT240 Plate Reverb Knobs 2-6 have the following functions for the various Reverb Effects: Reverb Knob 2 (Pre Delay) -Pre Delay Pre Delay Pre Delay Pre Delay Pre Delay Knob 3 (Decay) -Decay Decay Decay Decay Decay Knob 4 (Liveliness) -Liveliness Liveliness Liveliness Liveliness Liveliness Knob 6 (Reverb Level) Reverb Reverb Level Reverb Level Reverb Level Reverb Level Reverb Level twnsprng lexambnc lexstudo lex room lex hall emtplate 30 Section Four - Other Functions Expression Pedal You can link the Expression Pedal on the RP1000 to control the RP1000's Volume, Wah, WhammyTM, YaYaTM, or almost any of the RP1000's other parameters in real time with your foot. When a parameter has been linked to the Expression Pedal, you can also set the minimum (heel) and maximum (toe) value for the range. When you push down hard on the toe of the Expression Pedal to activate the V-switch, the Expression Pedal switches between the linked parameter and the Wah. To link a parameter to the Expression Pedal, follow these steps: 1. Press either Edit button until the Expression row is selected (indicated by the LED lighting on the Expression row). Rotate Knob 1 until eXp peDL appears in the Display. [. . . ] 4x12 Marshall 1969 Slant w/ Celestion® 25W Green backs Super speaker design provides a voice that is distinctive as it's name. 4x12 `96 Johnson® Vintage w/ Celestion® Vintage 30's Classic V30 sound with throaty midrange and great low end. 48 4x12 `96 VHT® Slant w/ Celestion® Vintage 30's A rare matchup from the guys at VHT. 4x12 `07 Mesa/Boogie Rectifier w/Celestion® Vintage 30's The ultimate 4x12 for the heaviest tone. 2x12 DigiTech® Bright A particularly bright but full sounding combo cabinet. [. . . ]