User manual DIGITECH WEAPON

[. . . ] Servicing is required when Sandy, Utah 84070, USA the apparatus has been damaged in any way, such as Date: December 5, 2003 power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the European Contact: Your local DigiTech Sales and apparatus has been exposed to rain or moisture, does Service Office or not operate normally, or has been dropped. 11. WARNING:To reduce the risk of fire or electric shock, Harman Music Group 8760 South Sandy Parkway do not expose this apparatus to rain or moisture. Refer to labels on the unit, including bottom cover, or Ph: (801) 566-8800 other markings and pertinent information. Fax: (801) 568-7583 Product option: all (requires Class II power adapter that conforms to the requirements of EN60065, EN60742, or equivalent. ) WARRANTY: We at DigiTech are proud of our products and back-up each one with the following warranty: 1. The warranty registration card must be mailed within ten days after purchase date to validate this warranty. [. . . ] See the Knob Function Descriptions section on following pages for a more detailed explanation of the Cntrl 2 knob's functions. 5. Type Knob Selects one of the seven different signature Dan Donegan tones. "Stupify" Rhythm Guitar - Distortion 2. "Mistress" Rhythm Guitar - Medium Distortion 3. "Voices" Intro Phaser/Ramp to Full Distortion 4. "Bound" Intro - Wah w/Distortion 5. "Rise" and "Intoxication" Octave Pitch Shift Effect 6. "Stupify" Bridge - Sitar Effect 7. "Mistress" Radio-Style Guitar Break - Distortion Please refer to the Knob Function Descriptions section for detailed information regarding each type. Input Jack Connect your instrument to this jack. Connecting a guitar cable to this jack supplies battery power even though the Indicator LED may not be lit. To prolong battery life, disconnect all cables when not in use. 7. Pedal Release Pins These two pins are spring-loaded hinges that hold the pedal in place. Push these pins in to release the pedal from the pedal chassis exposing the battery compartment. (See the Battery Replacement Diagram at the end of this Owner's Manual. ) 8. Pedal Press the pedal to turn the effect on and off. Out 1(Amp) Jack Connect this output to your guitar amplifier. Indicator LED This LED indicates when the effect is turned on. If the LED becomes dim or does not light when using battery power (with the cables connected), the battery needs to be replaced. Out 2 (Mixer) Jack The Out 2 (Mixer) output has been specifically designed for use with a full range audio system. This means that it is to be plugged directly into a mixer or recording device connected to full range speakers for optimal performance. Knob Function Descriptions LEVEL Output Level Output Level Output Level Output Level Output Level Output Level Output Level CNTRL 1 Low Freq. EQ Boost/Cut Phase Amount Wah Sensitivity Wet/Dry Mix Fret Buzz Amount Low Freq. EQ Boost/Cut Ramp Time Wah Attack Shift Amount +/- Octave Reverb Level High Freq. [. . . ] Type 7. "Mistress" Radio-Style Guitar Break - Distortion - This is the DigiTech® Metal MasterTM distortion sound that Dan uses live during the radio-style guitar break section of the song "Mistress". This effect type allows you to create the distortion tone of the X-SeriesTM Metal Master pedal. Set the knobs as shown below to produce this sound. Set Up Directions Follow these set up directions before use: 1. Turn the volume down on the amplifier/mixer you are connecting to. Connect the pedal output to the amplifier/mixer input. [. . . ]