User manual DIRECTV LSS-3200A

[. . . ] DIRECTV® HD Receiver OWNER'S MANUAL MODEL : LSS-3200A Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. Toll Free Number 1-800-243-0000 © Copyright 2004, LG Electronics U. S. A. , Inc. SAFETY WARNING CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRONIC SHOCK DO NOT REMOVE COVER (OR BACK). REFER TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a bookcase or similar unit. [. . . ] You may also modify any event in the list that was created in the Timer/Event menu. To modify or delete a program in the Timer/Record List: 1. Press the MENU button on the Remote Control to display the on-screen menu. Select the DIRECTV menu by pressing " "on the remote control. Scroll down to Timer/Record List using "E". Move the highlight to the right with "G" to select a program from the list. Press " " and the pop-up dialogue box will be displayed. Select "Delete" in the pop-up box if you want to cancel, then the highlight will return to the list. Or Select "Modify" in the pop-up box if you want to modify type, channel, date, time, duration and repeat options. The Timer/Record dialogue will appear for modification. (Note : If the program was reserved in the Guide menu, "Modify" can not be selected. ) 7. Press "F" to return to the previous level or press the EXIT button on the remote control if you want to return to TV viewing. 68 8. Initializing the System About Initial Setup The DIRECTV® HD Receiver is capable of receiving three types of signals; ANT, CABLE and DIRECTV® programming (if you are a DIRECTV customer). Initial Setup lets you initialize your system to function properly with your dish antenna. Setup Wizard Provides whole sequential process from dish selection (Step 1) to channel setup (Step 5). Dish Setup As first step, you should select one of three dish setup modes ( Manual Selection / Auto Detection /No Dish ). Manual Selection allows you to select the correct dish type among three different types available; Round Dish for Satellite Network A only, Oval Dish for Satellite Networks A and B, or Oval Dish for Satellite Networks A, B, and C. For advice on selecting a dish that will provide the services that you desire, contact DIRECTV (1-800-DIRECTV) or your local DIRECTV retail expert. If you already have a dish, refer to its user's guide to determine its type. To receive all available HD programming, you should install and select the Oval dish type (Oval dish (Sat A, B, C)). The Auto Detection feature will help you select your dish if you are unsure of your dish type. If you are not a DIRECTV customer and want to view programming only from Antenna/Cable, then select the No Dish Mode. 69 8-7. [. . . ] Although Dolby Digital can support up to 5. 1 channels, some broadcasts may only be available in stereo. - Confirm that the IR Controller is located near the Remote Control Sensor (see section 4-1 item 4) in accordance with your DVR Manual. - For the most reliable control, connect to your PVR/DVR using the Data Port connection (see section 3-2). - If using the Data Port (RS-232) connection for control, confirm that the other device supports APG-type control (some older devices only support the older MPG type control). [. . . ]