User manual DIRECTV PRD8650B

[. . . ] DSS® Receiver User's Manual Safety Information TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates important instructions accompanying the product. WARNING To reduce risk of fire or shock hazard, do not expose this receiver to rain or moisture. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. Cautions Do not stack electronic components or other objects on top of the DSS® Receiver. The slots on top of the receiver must be left uncovered to allow proper airflow to the unit. [. . . ] Insert batteries as shown in the battery compartment, matching the + and - end of each battery. Replace the cover. Connect the Home Control Data Interface Module 1. Plug the Data Interface cable into the LOW SPEED DATA port on the back of the DSS® receiver and tighten the screws. Snap the other end of the cable into the Data Interface module. Plug the Data Interface module into a power outlet, making sure to insert the plug completely. Plug the DSS® receiver power cord plug into the Data Interface module's convenience outlet. Be sure to insert the plug completely. Insert the batteries Back of DSS Receiver LOW SPEED DATA Connect the cables. Connect the Home Control Lamp Module 1. Plug the lamp power cord plug into the Lamp module. Plug the Lamp module into a power outlet, making sure to insert the plug completely. Connect the power cord. 54 The Menu System Home Control setup Once the Data Interface module is connected to the LOW SPEED DATA port, you must tell the receiver to use this port for Home Control. Press MENU·SELECT to bring up the Main menu. Point to and select Data Port and choose Home Control as the default setting Device Setup 1. From the Main menu select Home Control. Home Control can control several devices. 2. Select a device you would like to control. Keep track of devices by assigning a label. 3. Complete the on-screen sentence using the arrow buttons and MENU·SELECT. Press MENU·SELECT to scroll through the lists of appliances and locations. Use the arrow buttons and MENU·SELECT to select the house and module codes that match the device's remote module. Select Save Setup to complete the setup. 55 The Menu System Once the device is set up, there are two ways to control it. Select a device from the Home Control menu screen. You can turn it on and off, or schedule a timer that controls the device automatically. Schedule a timer by completing the on-screen sentence. Complete the on-screen sentence to schedule a timer. 1. Use the arrows and MENU·SELECT to enter an on and off time. 2 Point to and select Run Timer. If you want to change a device, select Edit Setup. You can schedule several timers to control the same device at different times. 56 The Menu System Fetch Menu The Fetch menu is a list of favorite menu items that you define. [. . . ] Please specify stock number 004-000-00345-4 when ordering copies. 76 Appendix C: Accessories Accessory Order Form for Digital Satellite Systems RG-6 Coaxial Burial Cable with weatherproof "F" connectors Description RG-6 Coaxial Cable 12 feet 25 feet D912 D925 D950 D975 D901 $12. 95 $15. 95 $21. 95 $29. 95 $29. 95 Part No. Price Qty Stereo Audio/Video Cable with gold RCA-type connectors 50 feet 75 feet 100 feet Stereo Audio/Video Cable Self-Installer's Kit contains cable and hardware to install the dish and connect the system. 6 feet 12 feet S-Video Cable Weatherproof "F" Connector (2) Grounding Block for RG-6 Cable TVRO Bullet Amplifier Self-Installer's Kit D906 D914 D913 D905 D902 D903 DKIT96 232578 HCDSS10 HC10LM HC20AM HC25AM $12. 95 $14. 95 $12. 95 $ 5. 30 $ 2. 95 $24. 95 $69. 95 $42. 15 $59. 95 $14. 95 $16. 95 $16. 95 POWER VCR AUX DSS1 DSS2 TV GUIDE FETCH MENU WHO ELE C T S CLEAR INFO CH+ ALT. AUD MUTE CH- GO BACK 1 4 7 INPUT 2 5 8 0 3 6 9 ANTENNA FORWARD REVERSE PLAY RECORD STOP PAUSE Remote Control replaces a lost remote. Or, order a second remote for convenience. Remote Control Home Control Kit Lamp Module 2-Prong Appliance Module 3-Prong Appliance Module VOL VOL HCDSS10 Home Control Kit contains a Data Interface that connects to the DSS® receiver, and a lamp module. [. . . ]