User manual DIRECTV SR-HD5

[. . . ] Mitsubishi SR-HD5 HD DIRECTV Plus Receiver Trademarks and Copyrights--This manual is copyright Mitsubishi and copyright © 1995-2000 by Hughes Network Systems. Software contained in the HD receiver and referenced in this manual is copyright © 1995-2000 by Hughes Network Systems. WatchWord, PreSelect, TurboTune, AlphaTune, and OneLine Guide are trademarks of Hughes Network Systems. DIRECTV, DIRECTV PLUS, DIRECTV HOME SERVICES, ADVANCED PROGRAM GUIDE, and DIRECT TICKET are trademarks of DIRECTV, Inc. [. . . ] Highlighting the Local Area button on the INSTALLATION screen and pressing the SELECT key on the remote control will display the LOCAL AREA screen. Using the L and keys, highlight either the Local In 1 button if you connected your terrestrial antenna or cable service to the jack labeled IN FROM ANT. Or, highlight the Local In 2 button if you connected your terrestrial antenna to the jack labeled SATELLITE IN. Then press the SELECT key on the remote control to display the Local In pop-up menu. On the Local In pop-up menu, use the L and keys to highlight the buttons for the type of connection made to the HD receiver, and then press the SELECT key on the remote control. L L Local In Connection Options The connection options found on the Local In 1 and Local In 2 pop-up menus are: None Antenna You are not connected to an antenna or cable. You have connected a standard VHF/UHF indoor or outdoor antenna. Cable TV (STD) You have connected a cable service that uses a standard type of cable signal. Cable TV (HRC) You have connected a cable service that uses the HRC type of cable signal. Cable TV (IRC) You have connected a cable service that uses the IRC type of cable signal. Note: Consult your cable company to find out what type of cable signal you have. After selecting your Local In connection and pressing the LOCAL AREA screen will be displayed. SELECT key on the remote control, the Note: Local In 1 and Local In 2 must have different input signal types. The receiver does not support the simultaneous connection of two terrestrial antenna signals or two cable signals. Page 4-9 Mitsubishi SR-HD5 HD DIRECTV Plus Receiver Scan Channels This option will automatically scan through all of the possible channel frequencies and place the active channel numbers into the program guide grid. NTSC (analog) channels will be listed by their normal one or two Channel Number. ATSC channels will be listed by their one or two digit main channel number followed by a hyphen and a number of 1 or greater. At this time, the program information for local NTSC and ATSC channels that is shown on the program guide will simply display "Regular Schedule. " To receive accurate program information for these channels, you need to connect to a satellite dish and download this information from DIRECTV. Channel Scan Selecting the Correct Satellite Dish Type for Terrestrial-only Operation If you have a terrestrial-only antenna hookup (that is, no satellite dish), you must configure the SR-HD5 receiver for a dish type of "None" so it will not search for a satellite signal. Highlighting the Dish Setup button on the INSTALLATION screen and pressing the on the remote control will display the DISH SETUP screen. L SELECT key Highlighting the Dish Type button on the DISH SETUP screen and pressing the SELECT key on the remote control will display the DISH TYPE pop-up menu. Using the L and keys, highlight dish type "None" and press the SELECT key. Editing Local Channels To remove or add local NTSC analog and ATSC digital channels in the channel list, use the L and keys to highlight the specific channel. Press SELECT to remove the checkmark and the channel from the channel list. Press SELECT again to add it back. L Time Setup You can set the current time and day, the current date, the time zone, and whether or not you observe daylight saving time. This option is only available if you have selected NONE as your DISH TYPE. Use the L and buttons to move around the TIME SETUP screen, then press SELECT to select an item, and you can use your remote control to enter numbers. When you subscribe to DIRECTV, the time will be automatically set and you cannot reset it. You can, however, reset the time zone and whether you observe daylight saving time. L Time Setup screen Installation Is Now Complete The installation and testing of the satellite dish antenna and/or terrestrial inputs is now complete. [. . . ] IMPORTANT NOTE: DIRECTV Programming (satellite programming access) is separate and distinct from this product (hardware) warranty. Your telephone communication connection is not warranted to be a local telephone call. DIRECTV Programming is a subscription service independent from this product. You must obtain and maintain a valid subscription directly from DIRECTV. [. . . ]