User manual DIRT DEVIL M302-0 AQUACLEAN MULTIFONCTION

[. . . ] For purchasing the Aquaclean universal steam cleaner and for your trust. Re: Hot steam and hot parts of the appliance. 5 Setting the appliance to the neutral position. Operating time per tank filling Steam availability Water tank Detergent tank Power cord length Weight (without accessories and with the tanks empty) : 2in1 steam mop & hand-held steam cleaner : Aquaclean 2in1 steam mop & hand-held steam cleaner : DD302-0 : 220–240 V~, 50/60 Hz : 1400-1600 W : approx. [. . . ] ATTENTION: Before starting cleaning, check whether the surface to be cleaned is suitable for steam cleaning. Always follow the cleaning instructions of the manufacturer. The steam cleaner is definitely not suitable for use on non-sealed wooden floors, soft plastics or furniture. even sealed wooden floors must only be steamed lightly (steam controller [Fig. 13] in the Min position) and never steam the same spot for too long. Cold glass surfaces may shatter as a result of heat shock. ATTENTION: Only ever operate the appliance with a filled water tank. The mains control light (" ") lights up. - The steam ready indicator (" 13 ") lights up. Select the steam controller position which you think is suitable for the surface you wish to clean (Fig. 13): - "MIN": for sealed wooden floors and laminate - middle position: for tiled floors and for PVC and vinyl floors - "MAX": for short-pile carpets and rugs 12 NOTE: We recommend that you begin with the lowest level ("MIN") and slowly increase the steam jet with the steam controller as required. 14/arrow) on the handle and hold it as long as you require a steam jet. To steam-clean, move the appliance back and forth slowly. If you are using detergent, repeat each passage several times (at least 3 times) so that a closed film of detergent can form. Always be especially careful when cleaning smooth floors, steps and stairs. Only work with moderate amounts of steam when cleaning smooth floors, otherwise a film of moisture will be left on the floor. Using less steam also ensures quicker drying and reduces the risk of slipping. ATTENTION: Do not leave the appliance standing in one spot when in operation. Otherwise there is an increased risk of damage to the surface. NOTE: If the steam ready indicator goes out, you can continue working. You only need to release the steam button (Fig. 1/2) and wait until the steam ready indicator (Fig. [. . . ] 35) every time you fill the water tank, Chapter 3, “Filling the water tank”. When first supplied, the filter medium on the inside of the cartridge is a very light colour (Fig. If, when you check it, you discover that the filter medium on the inside of the cartridge has significantly changed colour (Fig. 35/B) compared to its condition on delivery or less steam is being emitted, replace the cartridge as follows: 1. [. . . ]