User manual DIRT DEVIL M5050-5 ROUGE

[. . . ] 1 Overview of your Infinity Excell Thanks for your purchase of the Infinity Excell and your confidence in us. 2 Cleaning the cyclone unit and the dual motor protection filter . 15 Overview of the scope of delivery (fig. 1) 1 2 3 4 5 6 7 8 9 On/Off switch Carrying-handle Hygienic exhaust filter Exhaust filter cover Cable retraction button Crevice nozzle Dust container Right release button for suction hose (left button hidden from view) Dust container handle 10 Power cord with plug 11 Parking bracket 12 Particle trap 13 Cleaning indicator (hidden from view, optional*) 14 Furniture brush 15 Left release button for suction hose (right button hidden from view) 16 Suction hose 17 Dust container with "MAX" marking 18 Cyclone unit 19 Foam plastic element of the motor protection filter 20 Filter holder of the dual motor protection filter 21 Dust container cover with fitting markings 22 Release button for the dust container 23 Release button for the bottom plate 24 Bypass vent 25 Telescopic tube 26 Telescopic tube stop catch 27 Parking hook (hidden from view) 28 "Carpet/hard floor" selector (exemplary illustration) 29 Floor nozzle (exemplary illustration) „ Parquet brush (Fig. [. . . ] Included in the scope of delivery depending on model and features) are also: - Parquet brush (Fig. 2/4*): Its long bristles make it especially suitable for cleaning delicate surfaces (e. 2/5*): This has a rotating brush head and is most suitable for thoroughly deep cleaning of carpets. The brushing also raises the carpet pile. 2/6*): This is equipped with a rotating brush head for thoroughly deep cleaning of upholstered furniture. 2/7*): Use this to vacuum dust from distant, hard-to-reach places. 4* 5* 6* 1 2 3 7* 2 A M AX B NOTE: When you use the long, flexible crevice nozzle, under certain circumstances the pressure inside the vacuum cleaner might drop too far thus triggering the safety valve. A whistling noise (depending on the vacuum cleaner model) and greatly reduced suction performance. In this case, depending on the vacuum cleaner model and equipment, you have to reduce the suction power or open the bypass vent until the valve no longer triggers. Store nozzles not in use in their holder (Fig. Attach the selected nozzle to the bottom end of the telescopic tube (Fig. ATTENTION: 1 Before vacuuming, make sure that the fitted nozzle suits the surface to be cleaned. Insert the end of the suction hose into the intake opening (Fig. 5/A) of the vacuum cleaner until you hear and feel it locking into place. Make sure that the guiding-tabs show downwards and slide into the corresponding openings. Insert the handle into the upper end of the telescopic tube (Fig. Adjust the length of the telescopic tube (Fig. Press down the release latch on the tube to do this. Then extend the telescopic tube to the desired length. Let go of the release catch while pulling until it locks in place. Check appliance and power cord before each use. a damaged appliance must never be used. [. . . ] Remove residual dust with a soft brush, e. Place the clean/new exhaust filter back into its fitting. Attach the exhaust filter cover at the bottom side first and then fold it upwards. 5 Spare parts and accessories ATTENTION: Item number Description 5050001 1 Dual motor protection filter (2 pieces: foam plastic filter element (Fig. [. . . ]