User manual DIRT DEVIL REBEL21 DD2210

[. . . ] 1 About the operating manual 1 Safety instructions Read this operating manual completely before working with the appliance. Keep the operating manual in a safe place. Include the operating manual if you pass the appliance on to someone else. Failure to comply with these instructions can lead to serious injuries or damage to the appliance. [. . . ] 12) retract the cord by pressing the retraction button ( ) to pull in the cord up to the yellow mark (Fig. Otherwise, the power cord may be damaged. Switch on the appliance using the on/off switch ( ) (Fig. NOTE: Your vacuum cleaner has an integrated protective function that turns off the appliance before it can overheat (e. 1, ‘Before you send in the appliance’. 1 3 Maintenance and care Emptying the dust container and cleaning the motor protection filters 16 17 18 19 20 21 22 23 24 25 click!27 29 CAUTION: The filter elements are washable, but may not be cleaned in dishwashers or washing machines. „ Also, do not use cleaning agents or brushes with hard bristles to clean the filter elements. „ Leave the filter elements to dry after cleaning them with water (approx. „ Only put them back into the appliance when they are completely dry. Leave the filter elements to dry after cleaning them with water (approx. Otherwise emptying it will get harder and harder or smells and bacteria might develop, depending on what you have vacuumed up. „ Therefore, it is best to empty the dust container after each vacuuming session. „ Empty and clean the dust container at the latest when the cleaning/ emptying display lights up (Fig. „ Also empty and clean the dust container every 3 months at the latest before storing for a long time or before sending the appliance. CAUTION: Switch off the appliance before removing the dust container. This will prevent dust from damaging the appliance. NOTE: The filter elements are constructed so that they will only go all the way down if in the right position. „ Nevertheless, it is helpful if you align the filter unit with respect to the vacuum cleaner as shown in Fig. „ Then lower the filter unit completely into the vacuum cleaner until the three noses of the vacuum cleaner engage with the respective recesses of the filter unit (Fig. 29) will not shut properly, then you have to take the parts out again and put them back in. NOTE: You can dispose of the dust container with your regular domestic trash as long as it contains no waste materials prohibited in domestic trash. [. . . ] Before contacting us or even sending the appliance to us, use the table to check whether you can correct the problem yourself. Problem The cleaning results are unsatisfactory in spite of the appliance working correctly. The collar brush of the floor nozzle is not in a position appropriate to the type of floor (Figures 9 – 10). Adjust the position of the collar brush to the type of floor using the floor nozzle switch (Figures 9 – 10). [. . . ]