User manual DIRTDEVIL CAN VAC 1-93

[. . . ] OWNER'S MANUAL Operating and Servicing Instructions CAN VAC" PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING YOUR CAN VAC. 1-200397-001 Rev. 1/93 CONSUMER INFORMATION This information has been compiled by the Vacuum Cleaner Manufacturer's Association working with government and private sources, concerned with product safety. These basic guidelines are for your protection and convenience. THIS CLEANER IS INTENDED FOR HOUSEHOLD USE ONLY. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS When you use an appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE YOU USE THE APPLIANCE. [. . . ] Note the groove on the caddy and the clip on the CAN VAC (4. Place your two most used accessories (except the crevice tool) in the round pockets on top of the caddy (B). Slide the crevice tool into the slots available under these two tools. It will enter from both the right and left sides. TO REMOVE THE TOOL CADDY Reach underneath the tool caddy. Pull the entire caddy up and off of the cleaner. G. SHOULDER STRAP INSTALLATION AND REMOVAL (optional) 1. Squeeze together the clip on one end of the strap. Insert the clip into one of the grooves (one front, one back) on CAN VAC (A). NOTE: Clip may break if not installed properly. 3. Do the same steps for the remaining clip and groove. Your CAN VAC can now be carried on your shoulder while you clean above the floor (B). H. TO MOUNT WALL BRACKET (optional) Choose a convenient location such as a broom closet in which to store your CAN VAC. Using the screws provided, mount the bracket as shown against a wall (a). Hang the attachments on the bracket as shown (B). You can store the wands and remaining tool on the hose end while hanging. If your closet does not allow for this, simply stand the remaining accessories in a corner. A I. TO USE AS A BLOWER NOTE: UNPLUG CLEANER BEFORE REMOVING OR INSTALLING HOSE. J. TO USE POWER NOZZLE (optional) Convert your Can Vac into a dual motor system with an OPTIONAL Power Nozzle Kit. With its separate motor and revolving brush, the Power Nozzle actually lifts your carpet. The revolving brush gently sweeps the carpet clean of dust and dirt particles buried deep in the carpeting. POWER NOZZLE GRID CAN VAC MODEL *REQUIRED POWER NOZZLE KIT - 02003, 02003WC 03004 03013 Model 213 Model 314 Model 313 *To order, refer to the enclosed quick parts mailer or call 1-800-321-1134 for an Authorized Royal Dealer near you. K. CUSTOMER SERVICE In the event that further assistance is required, see your Yellow Pages for an authorized Royal Dealer. Costs of any transportation to and from any place of repair are to be paid by the owner. [. . . ] Coloque 10s dos accesorios que usted utiliza con mas frecuencia (pero no el accesorio para espacios pequefios) en 10s huecos redondos en la parte superior del portaaccesorios (B). lntroduzca el accesorio de espacios pequefios en las ranuras que se encuentran debajo de 10s otros dos accesorios. Puede introducirse desde cualquier lado. QUITAR EL PORTAACCESORIOS Coja el portaaccesorios por debajo. Tire hacia arriba, quitando el portaaccesorios de la aspiradora. B G. [. . . ]