User manual DIRTDEVIL M02003

[. . . ] Unplug it when it is not in use and before you service it. . Turn allcontrolsto"0FF" beforeunplugging the vacuum cleaner. 0 Do not pull on the cord to unplug the 0 Unplugthe vacuum cleaner if you leave used on wet surfaces. Do not expose to rain, store indoors. 0 Do not use an extension cord with this cleaner. 0 Keep end of hose, wands and other o enings away from your face and body. feet, hair and clothing away rom moving parts. [. . . ] PROPER VOLTAGE IS LISTED ON CLEANER PLATE. THE DIRT DEVIL CAN VAC OPERATES ON 120 VOLTS A. C. DO NOT OPERATE THIS UNIT NEAR FLAMMABLE GASES OR LIQUIDS. TO PREVENT FIRE, DO NOT PICK UP HOT OBJECTS SUCH AS CIGARETTE BUTTS, ETC. GET ACQUAINTED WITH YOUR CANISTER Easy Glide Wheels Tool Caddy' Gripper Handle Power Switch Door Release Hose Connection Flexible Hose* Gripper Handle 9. 16. Rolling Caster Wheel Quick Release Cord Clip Cord Wrap Carpet Nozzle* Bare Floor Brush* Extension Wands' Crevice Tool 2 in 1 Tool 'Attachments vary per model. This vacuum cleanerwill operate best when serviced with genuine parts. To be sure that you receive genuine parts and service at fair prices, have your cleaner serviced at an Authorized Royal Dealer or see your Yellow Pages for a dealer near you. Should you experience any difficulties in operating this vacuum cleaner, report it immediately to the Dealer from whom it was purchased. The service parts used in this unit are easily replacedand readily available from your Authorized Royal Dealer. You have purchased the finest small canister available. This compact canister has the power of many full-sized canisters. Follow the instructions enclosed and it will give you years of efficient service. HOSE INSTALLATION AND REMOVAL NOTE: UNPLUG CLEANER BEFORE REMOVING OR INSTALLING HOSE. 4. Give hose a slight tug to be sure it is in place securely. With a paper bag and the hose in place, you are ready to begin vacuuming. B ATTACHMENT INSTALLATION AND REMOVAL 1. Choose any of the handy A accessories to meet your various cleaning needs. Then simply push it firmly onto the hose or wand end (A). 2. It can be used with many combinations of wands and tools. 3. To remove a tool or wand, pull the two apart gently. You may rotate the attachment back and forth a little to make the removal easier. OPERATING INSTRUCTIONS NOTE: UNPLUG CLEANER BEFORE CHANGING PAPER BAG. CLEANER MUST HAVE PAPER BAG IN PLACE AT ALL TIMES. PAPER BAG REMOVAL AND INSTALLATION Check to be sure your CAN VAC has one paper bag in place before you begin vacuuming. 1. Remove hose if it is in place from the face of the cleaner. Depress door release button to open door and expose paper If your CAN VAC has no paper insert in place, follow these easy bag installation steps. 3. [. . . ] To release your cord without unwinding it, push in the black quick cord release tab (B). Your power cord will now PI off in one coil. INSTALLATION AND REMOVAL OF CONVENIENT SHOULDER STRAP (optional) 1. Squeeze together the clip on one end of the strap. Insert the clip into one of the grooves (one front, one back) on CAN VAC (A). NOTE: Clip may break if not installed properly. 3. [. . . ]