User manual DIRTDEVIL M086300 3-02

[. . . ] OWNER'S MANUAL Operating and Servicing Instructions Please read these instructions carefully before using your upright vacuum. Let us help you put your cleaner together or answer any questions, call: 1-800-321 134 (USA & Canada) -1 For quick reference, please record your vacuum information below. code located on the lower backside of cleaner) A WARNING: Cleaner assembly may include small parts. Small parts can present a choking hazard. 0 996 All rights resewed #I -1 13018-033 1 3/02 CONGRATULATIONS You are now the proud owner of the Dirt DevilBSwivel Glidem, the world's most maneuverable upright with patented Swivel CastersTM effortless maneuvering for on all types of floors. [. . . ] Only use attachments and hoses recommended by the manufacturer. Use the vacuum cleaner only as stated in this manual. SAVE THESE INSTRUCTIONS WARNING: To reduce the risk of electric shock, this appliance has a polarized plug (one blade wider than the other). i fit in a polarizedoutlet only one way. If the plug does not tt fully in the outlet, reverse the plug. If it still does not tact a qualified electrician to install the proper outlet. 2 L 1 FEATURES Non-slip grip" handle OnlOff Switch Front Panel Release Lever *Edge Wedge" Tool IUpholstery Tool 5. *2-in-1 Tool: Dusting brushlUpholstery tool 21. *Hose Anchor *Not available on all models HOW TO ASSEMBLE TOOL REQUIRED: PHILLIPS SCREWDRIVER 1. Stand unit in upright position and place upper handle onto upright (Diagram 1). Hold mrd down and out of the way to avoid pinching. P ush upper handle ontD uptight, aligning 3. BACK OF UPRIGHT add TWO screws (supplied) to secure handle (Diagram 3). onloff switch with handle ope ning (Diagram2). la. Line up slots with tabs on hose inlet HOSE ASSEMBLY AND TOOL STORAGE I. ATTACH HOSE: Attach the flexible hose to the cleaner (Diagram I). Match the long arrow on the cuff to the arrow on the inlet (Diagram la). Push down firmly on the cuff and turn clockwise. Insert the hose handle into the side of the cleaner. Press down firmly to secure (Diagram 2). CORD STORAGE: For tidy cord storage, wrap cord around hwks on side of cleaner with quick cord release (Diagram 2). *Not available on all models CARPET SETTINGS NOTE: The cleaner may be in the upright or operating position to adjust carpet setting. Adjusting in the upright position: Rotate the knob to the desired setting. (Diagram l). Once the carpet setting is selected, and the cleaner placed in the operating position, the setting will be in the c NOTE: The knob will rotate with some resistance. Adjusting in the operating position: Rotate the knob to the desired setting. nozzle will raise and lower as the knob is rotated. HOW TO OPERATE 1. [. . . ] Insert end of standard screwdriver into the side slot a nd Ply outward to pop headlight lens out. Push bulb into socket to replace (Diagram 2). Snap headlight lens panel back into place. Reattach front panel. HOW TO TRANSPORT CLEANER Use the carrying handle on the back of the cleaner to move cleaner from room to room (Diagram 3). [. . . ]