User manual DIRTDEVIL M086900 3-03

[. . . ] If the vacuum cleaner should become defective within the warranty period, we will repair or replace any defective parts free of charge. The complete machine must be delivered Dreoaid to any ROYALmAuthorized Sales & Warranty Service Station. Please include complete description of the problem, day of purchase, copy of original sales receipt and your name, address and telephone number. If you are not near a Warranty Station, call the factory for assistance at USA & Canada: 1-800-321 -1 134. [. . . ] Push upper handle onto upright, aligning upper handle with handle opening (Diagram 2). Push down firmly on the cuff and turn clockwise. (B) *Push Power Edger'" (Optional) onto upper back panel with bristles facing out. (C) Slide 2-in-1 tool onto upper back panel with bristles facing out. (D) Slide the Extension wand, small end down, onto the lower back panel. (E) Slip crevice tool onto lower back panel. CORD STORAGE: For tidy cord storage, wrap cord around hooks on side of cleaner with quick cord release (Diagram 4) (A). Switch located on left side of cleaner directly above HEPA filter (Diagram 1). Handle should be in the upright position before adjusting the carpet setting (Diagram 2). Turn height adjustment knob to match the surface being cleaned (Diagram 3). Once height is selected the nozzle will go to the correct position. NOTE: Rotating brush could cause area rug fringe to become tangled within cleaner. Use caution when vacuuming throw rugs with fringe. ABOVE FLOOR CLEANING Cleaner must be in the upright position to lift the rotating brush off the carpet when cleaning above the floor. Remove the hose from the side of the cleaner using the handle (Diagram 4). CAUTION: Brush agitator continues to rotate while hose is removed or in use and at all times while cleaner is on. Keep hair, loose clothing, fingers, and all parts of body away from brush area while cleaner is on. Choose any of the handy accessories or use the hose alone. Simply push the attachment firmly onto the end of the wand or hose handle. to remove tool , twist and pull apart gently. *FOR HANDS FREE EDGE CLEANING: Remove *Power Edger'" from upper back panel. insert *Power Edger'" into desired *Power Edger'" slot. [. . . ] Push bulb into socket to replace (Diagram 2). Power cord not firmly plugged into outlet. Take to service center or call 1-800-321-1 134. Cleaner won't pick-up or low suction Cleaner is difficult to push 1. [. . . ]