User manual DIRTDEVIL M087300 8-08

[. . . ] NOTE: the cleaner must remain unplugged during the 30 minute cooling period. Thank you for your support of Dirt Devil® products. You are now the proud owner of the Dirt Devil®. [. . . ] (c) Slide the extension wand/crevice tool into round slot on the front right side of tool caddy. Keep hair, loose clothing, fingers, and all parts of body away from brush area while cleaner is on. Cleaner must be in the upright position to lift the rotation brush off the carpet when cleaning above the floor. Turn cleaner on by depressing foot pedal located on the back left side of the cleaner. Cleaner must be in its upright position to raise brushroll. 5) to keep out of the way while vacuuming. To release handle, push the handle release pedal located on the lower left side of the cleaner. Choose any of the handy accessories or use the hose alone. Simply push the attachment firmly onto the end of the wand or hose handle. Move the handle and adjust it to the desired position for (a) storing the upright, (b) operating the cleaner, and (c) de-press the handle release pedal again to clean under furniture. Turn the height adjust knob to match the surface being cleaned. If vacuum is used frequently, the filter may require more frequent cleaning. Press dirt container release button on back of cleaner to remove the dirt container. For F8 filter replacement (Part # 3-UDO280-001), please call 1-800-321-1134 or visit our website at www. Hold dirt container over garbage can and press clean release dirt container button to empty. Make sure container bottom center opening is clear of debris. [. . . ] Diagram 3: Remove nozzle guard (see Diagram 1) by removing the five (5) screws. To reassemble, be sure tabs are engaged. Slip the O-ring into the groove at the neck of the Turbo Tool/Power Brushtocompletereassembly. [. . . ]