User manual DIRTDEVIL MCE7900 12-05

[. . . ] Do not handle plug or appliance with wet hands. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. [. . . ] This appliance is equipped with a cord having an equipmentgrounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is for use on a nominal 120-volt circuit and has a grounding attachment plug that looks like the plug illustrated in the sketch. Make sure that the appliance is connected to an outlet having the same configuration as the plug. No adapter should be used with this appliance. Warrants this vacuum cleaner to be free of defects in material or workmanship commencing upon the date of the original purchase. Refer to your vacuum cleaner carton for the length of warranty and save your original sales receipt to validate start of warranty period. If the vacuum cleaner should become defective within the warranty period, we will repair or replace any defective parts free of charge. The outer tank (Clean Water Tank) contains the cleaning solution and water mix while the inner tank (Dirty Water Tank) collects dry and wet debris. Push down on CleanIDirty Grasp tab (Diagram 3) and pull up to remove filter Water Tank latch while assembly (Diagram 3a) out of tank. Empty contents grabbing handle and pullina into sink (Diagram 3b). K n k upand out from main body of cleaner. Return filter assembly back into CleanlDirtv Water (Diagram 1). To ensure a proper fit, make surearrow on filter assembly is aligned with Clean Water Tank Cap (Diagram la. Replace CleanIDirty Water Tank into main body of cleaner and snap CleanIDirty Water Tank latch into place. Pull filter assemblv UD and out Remove any loose debris from filter by tapping the filter against a garbage can. Allow filter and filter assembly to air dry completely before use. For filter replacements, please call 1-800-3211134 or visit www. Push filter down a h into filter assembly (Diagram 6). [. . . ] Remove debris from brushroll and push motor reset button 4. Take to service center or call 1-800-321-1134. Allow to cool for 30 minutes before use - Pg. Cleaner won't pick-up o r low suction Step on SOLUTION ONIOFF pedal to turn off solution dispense - Pg. [. . . ]