User manual DLS MB6

[. . . ] This manual will show you how to do a correct installation. Please read the entire manual before you begin installation. [. . . ] Safety Considerations for boat installation: Your speakers must be installed in a manner which does not interfere with your vessel's factory installed electronic devices. You should also take the time to securely mount them so that they do not come loose in the event of a collision or a sudden jolt to the vessel. - Check before drilling any holes in your vessel to make sure that you will not be drilling through the hull, a fuel tank, a fuel line, wiring harness or other vital vessel system. - Protect all wiring from sharp edges (metal , fibreglass , etc. ) by carefully routing them, tying them down and using grommets and loom where appropriate. Allow the speakers to play at normal volume for at least 15-20 hours. For technical assistance ask the shop where the product was sold or the distributor in your country. you can also send an e-mail to info@dls. Se Information can also be found on our web-site www. For this reason all or part of specifications & designs may be changed without prior notice. [. . . ] Unscrew to insert The terminals accept 4 sq mm / AWG11 cable size wire. 2-vägs basreflex i ABS-plst, Vit eller mörkgrå 4 ohm MB5: 5, 25" (13 cm) MB6: 6, 5" (16, 5 cm) MB5: 20 mm /0, 8" soft dome MB6: 25 mm / 1" soft dome MB5: 80 Watt RMS MB6: 110 W RMS MB5: 160 Watt MB6: 220 Watt MB5: 70 Hz-20 kHz MB6: 55 Hz-20 kHz 90 dB / W / m -20 C - +85 C MB5: B: 235 mm, H: 155 mm, D: 160 mm MB6: B: 285 mm, H: 178 mm, D: 170 mm MB5: 2, 5 kg / 5, 4 lbs MB6: 3, 3 kg / 7, 3 lbs [. . . ]