Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual DLS TR100. We hope that this DLS TR100 user guide will be useful to you.
Lastmanuals help download the user guide DLS TR100.
Detailed instructions for use are in the User's Guide.
[. . . ] 100 V line transformer TR100, for DLS In-wall speakers
100 V Line Speaker Systems
If you want to install In-ceiling speaker or In-wall speakers in hotels, schools, churches or restaurants it is often much easier to use Line Speaker Systems. The most common way is the 100 V system. [. . . ] All the loudspeakers step-down transformer primaries are connected in parallel to the constant voltage line. + Parallel connection of 100 V Line Speakers
Technical data TR100
Art. no Input Output Insertion loss T. H. D Frequency response 9-26890 20 W - 10W - 5 W / 100Volt 4 ohms 1dB max @ 1 kHz 1% max @ 70 Hz 1 kHz +- 1 dB 50 Hz - 1 dB 10 kHz - 1, 5 dB 20 kHz - 3 dB 42/61 x 53 x 43 mm
Size W x H x D
Amplifier
DLS Svenska AB
P. O. Box 13029, SE-40251 Göteborg, Sweden Tel: +46 31 840060, Fax: +46 31 844021 E-mail: info@dls. se - www. dls. se
The TR100 is attached to the speaker frame with two screws as on the photo. It fits directly to models IW126i, IW426 and IW428. Red and black cables are connected to the speaker terminal + and -. Line voltage connect to the transformer primare wires between black, and one of the others (yellow, orange or brown).
100 V line transformer TR100, for DLS In-wall speakers
100 V Line Speaker Systems
If you want to install In-ceiling speaker or In-wall speakers in hotels, schools, churches or restaurants it is often much easier to use Line Speaker Systems. The most common way is the 100 V system. It is a "constant-voltage-system" where the amplifier is equipped with a step-up transformer which increases the normal voltage output up to 100 Volts. The main difference between a low impedance speaker system in 4 or 8 ohm is the way the individual loudspeakers are connected to the amplifier. In a convetional low-impedance system you must connect the speakers in series and parallell in a way to maintain the correct impedance for the amplifier. In a 100 Volt line system, a large number of single loudspeakers, each equipped with a step-down transformer, can be connected to one single speaker cable. Each speaker must be equipped with a step-down transformer. [. . . ] Red and black cables are connected to the speaker terminal + and -. Line voltage connect to the transformer primare wires between black, and one of the others (yellow, orange or brown). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DLS TR100
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual DLS TR100 will begin.
